Connection Of Options (Optional Parts) - Kenwood XD-751 Instruction Manual

12
Connection of Options
Connect separately sold parts as shown in the figure.
Do not plug the power cord into the power outlet until all
of the required connections have been made.
Audio output
Audio input
L
R
OUTPUT
L
R
INPUT
AUX
INPUT
LEVEL
MIN. MAX.
Optical-fiber cable
(Provided with the MD recorder)
DIGITAL OUT jack (OPTICAL)
Optical-fiber cable
(Optional Parts)
MD recorder
1 2
L
ANTENNA
R FM
AUX
75
OUTPUT
L
AUX
L
GND
R
AUX FM
INPUT 300 FRONT
SPEAKERS
AUX
INPUT (6-16 )
AM
LEVEL
R
MIN. MAX.
AUX
SUPER
WOOFER
PRE OUT
If necessary, remove the cap and plug
the optical-fiber cable (optional).
DIGITAL
OUT
OPTICAL
Cap
In regard to the SURROUND switch
This switch can be used only when the separately sold
surround (rear) speakers are connected. When the switch
is set to ON, surround playback can be enjoyed. When
this switch is set to OFF, normal playback is executed.
÷ Please operate this switch while the power is switched off.
÷ We recommend to keep this switch set to OFF when no
surround (rear) speakers are connected to obtain a better
sound quality.
÷ When the switch is set to OFF, no sound will come from the
surround (rear) speakers.
3
% ON
SURROUND
fi OFF
– +
+
L
–
R
– SURROUND
SPEAKERS
(8-16 )
+
DIGITAL
OUT
OPTICAL
System connection (XD-5...series)
Surround (rear) speakers
L
R
(Except for some areas)
Surround switch
% ON
SURROUND
fi OFF
– +
L
R
SURROUND
SPEAKERS
(8-16 )
SUPER
WOOFER
PRE OUT
Super woofer
Extremely low sound is played back pow-
erfully. This can be used with any type of
playback.
XD-SERIES (En)