Troubleshooting
13 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
▶
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
The appliance is not
cooling, the displays
and lighting light up.
The temperature dis-
play flashes and a
warning signal
sounds.
The temperature dif-
fers greatly from the
setting.
Cause and troubleshooting
Showroom mode is switched on.
Carry out the appliance self-test. → Page 21
▶
a Once the appliance self-test has ended, the appli-
ance switches to normal operation.
Different causes are possible.
Press
.
▶
a The alarm is switched off.
The appliance door is open.
Close the appliance door.
▶
The exterior ventilation grilles are blocked.
Remove any obstructions from in front of the exter-
▶
ior ventilation grilles.
Larger quantities of fresh food have been put in.
Do not exceed the max. freezing capacity.
▶
→ "Freezing capacity", Page 15
Different causes are possible.
Switch off the appliance. → Page 13
1.
Switch the appliance back on after five minutes.
2.
→ Page 13
If the temperature is too warm, check the temper-
‒
ature again after a couple of hours.
If the temperature is too cold, check the temper-
‒
ature again on the following day.
Troubleshooting en
19