Table of Contents
Advertisement
en Troubleshooting
Troubleshooting
14 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord or the appliance power cable of this appliance is damaged,
▶
it must be replaced with a special power cord or special appliance power
cable, which is available from the manufacturer or its Customer Service.
Fault
The appliance is not
cooling, the displays
and lighting are lit.
The LED lighting does
not work.
A warning tone
sounds and the set
temperature (refriger-
ator compartment)
and alarm flash.
A warning tone
sounds and the set
temperature (freezer
compartment) and
alarm flash.
24
Cause and troubleshooting
Showroom mode is switched on.
Switch off the appliance. → Page 16
1.
Wait 2 minutes.
2.
Switch the appliance back on. → Page 15
3.
Wait 1 minute and then press and hold °C until 4
4.
audible signals have sounded.
After a short time, check whether your appliance is
5.
cooling.
Different causes are possible.
Call customer service.
▶
The customer service number can be found in the
enclosed customer service directory.
The refrigerator compartment door is open.
Close the refrigerator compartment door.
▶
Different causes are possible.
Press alarm.
▶
a The alarm is switched off.
The freezer compartment door is open.
Close the freezer compartment door.
▶
External ventilation openings are covered up.
Remove any obstructions from in front of the ex-
▶
ternal ventilation openings.
Larger quantities of fresh food have been put in.
Advertisement
Table of Contents
