Table of Contents
Advertisement
Troubleshooting
13 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
▶
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
The appliance is not
cooling, the displays
and lighting light up.
or
appears in the
temperature display.
Temperature display
flashes.
Cause and troubleshooting
Showroom mode is switched on.
Carry out the appliance self-test. → Page 21
▶
a Once the appliance self-test has ended, the appli-
ance switches to normal operation.
The electronics have detected a fault.
Switch off the appliance. → Page 13
1.
Disconnect the appliance from the mains.
2.
Unplug the appliance from the mains or switch off
the circuit breaker in the fuse box.
Reconnect the appliance after five minutes.
3.
If the message still appears on the display, call cus-
4.
tomer service.
The customer service number can be found in the
enclosed customer service directory.
Different causes are possible.
Press
.
▶
a The alarm is switched off.
The appliance door is open.
Close the appliance door.
▶
The exterior ventilation grilles are blocked.
Remove any obstructions from in front of the exter-
▶
ior ventilation grilles.
Larger quantities of fresh food have been put in.
Do not exceed the max. freezing capacity.
▶
→ "Freezing capacity", Page 15
Troubleshooting en
19
Advertisement
Table of Contents
