Cleaning And Maintenance; Accessories And Replacement Parts - Beurer BM 35 Instructions For Use Manual

Displaying and deleting measurements
• The results of each successful measurement are stored
together with date and time. With more than 60 items
of measured data, the earliest items of data measured
are lost.
• Select the desired user memory by pressing the MEM
button and then the + button.
• Press the MEM button again to display the average of all
saved measurements in the user memory.
• If you press the MEM button again, the average value
of the morning measurements for the last 7 days will be
displayed (morning: 5.00 a.m. – 9.00 a.m., display ).
• If you press the MEM button again, the average value of
the evening measurements for the last 7 days will be dis-
played (evening: 5.00 p.m. – 9.00 p.m., display
• If you continue pressing the MEM button, the latest indi-
vidual results are displayed with date and time.
• To clear the memory, press the MEM button, then the
display shows
user memory and confirm by pressing MEM again.
Press and hold the + and
seconds (the display will show
. Press the + button to select the
keys simultaneously for 5
).

8. Cleaning and maintenance

• Clean the device and cuff carefully using a slightly damp
cloth only.
• Do not use any cleaning agents or solvents.
• Under no circumstances hold the device and cuff under
water, as this can cause liquid to enter and damage the
device and cuff.
• If you store the device and cuff, do not place heavy objects
on the device and cuff. Remove the batteries. The cuff line
should not be bent sharply.ies. The cuff tube should not have
any sharp kinks

9. Accessories and replacement parts

Accessories and replacement parts are available from the cor-
responding service address (according to the service address
list). Please state the corresponding order number.
) .
Designation
Standard cuff (22-36 cm)
XL cuff (30-42 cm)
29
Item number and/or
order number
163.537
162.973