Brake Lights - Polaris RANGER 1000 2020 Owner's Manual For Maintenance And Safety

MAINTENANCE
5. Adjust the beam to the desired position by loosening or tightening the bottom
r
screw and moving the lamp to the appropriate height.
6. Adjust the beam to desired position. Repeat the procedure to adjust the other
headlight.
Due to the nature of light utility vehicles and where they are operated,
headlight lenses become dirty. Frequently washing is necessary to maintain
lighting quality. Riding with poor lighting can result in severe injury or death.

BRAKE LIGHTS

When the brake pedal is depressed, the brake light comes on. Check the brake
light before each ride.
To check the brake lights, do the following:
1. Turn the key to the ON position.
2. Depress the brake pedal. The brake light should come on after about 10mm
(0.4 in.) of pedal travel. If the light doesn't come on, check the bulb.
132
WARNING