Engine Oil; Oil Recommendations; Oil Check - Polaris RANGER 1000 2020 Owner's Manual For Maintenance And Safety

Hide thumbs Also See for RANGER 1000 2020:
Table of Contents

Advertisement

MAINTENANCE

ENGINE OIL

Always check and change the oil at the intervals outlined in the Periodic
Maintenance Chart. Always use the recommended engine oil. Always change
the oil filter whenever changing oil.
Pay special attention to the oil level. A rise in oil level during cold weather can
indicate contaminants collecting in the oil sump or crankcase. Change oil
immediately if the oil level begins to rise. Monitor the oil level, and if it continues
to rise, discontinue use and determine the cause. Your dealer can assist.
WARNING
Vehicle operation with insufficient, deteriorated, or contaminated engine oil will
cause accelerated wear and may result in engine seizure, accident and injury.
Always perform the maintenance procedures as outlined in the Periodic
Maintenance Chart.

OIL RECOMMENDATIONS

POLARIS recommends the use of POLARIS PS-4 5W-50 4-Cycle Oil or a
similar oil. Refer to the Specifications section for capacities.
Oil may need to be changed more frequently if POLARIS PS-4 engine oil is not
used. Follow the manufacturer's recommendations for ambient temperature
operation. See the Polaris Products section for part numbers.
NOTICE
Mixing brands or using a non-recommended oil may cause serious engine
damage. Always use the recommended oil. Never substitute or mix oil brands.

OIL CHECK

The oil dipstick is located on the engine. Access the dipstick through the right
rear wheel well.
To check the oil, do the following:
1. Position vehicle on a level surface and place the transmission in PARK.
2. Stop the engine and allow it to cool down before removing the dipstick.
104

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ranger 1000 crew 2020

Table of Contents