Battery Installation - Polaris RANGER 1000 2020 Owner's Manual For Maintenance And Safety

MAINTENANCE
If you do not drive the vehicle for more than TWO WEEKS, Polaris recommends
using a BatteryMINDer® 1510 1.5 AMP (PN 2830404) or 12V 1.5 AMP
Convertible BatteryMINDer® (PN 2830511), which can be ordered through your
dealer. During charging, place the charger outside of the vehicle and protect it
from moisture.
NOTICE
For added convenience Polaris offers
q
an adapter (PN 2414957) which
allows easy connection to the
vehicle's battery. Open the hood to
access the outlet, located along the
back wall.
If you plan to store the vehicle for ONE MONTH or longer, remove the battery
from the vehicle, then store the battery in a cool and dry location. Continue to
maintain the battery.
When using an automatic charger, refer to the charger manufacturer's
instructions for recharging.

BATTERY INSTALLATION

1. Ensure that the battery is fully charged.
2. Place the battery in the battery holder.
3. Coat the terminals with dielectric grease or petroleum jelly.
4. Connect and tighten the red (positive) cable first.
5. Connect and tighten the black (negative) cable last.
6. Install the battery hold-down strap and tighten the screws.
7. Verify that cables are properly routed.
8. Reinstall the seat.
135