Network Connection Setting - Toshiba BDX3000KU Owner's Manual

Function setup
Customizing the Function Settings

Network Connection Setting

1. Press / to select Network in stop mode, then press
button,
I. If no Ethernet cable is connected to the ETHERNET
jack on the back of your player, a screen similar to the
following appears:
Wireless
Network List
WiFi Protected Setup (WPS)
Manual
IP Settings
For detailed operations, refer to the "Confi guring a
wireless Internet connection".
II. If a wired connection is made to your player, a screen
similar to the following appears:
Wired IP Settings
Link Status
MAC Address
IP Mode
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
Apply Cancel
Refer to the "Confi guring a wired Internet connection"
for details.
Notes:
• "Wireless" and "Wired" are optional and do not appear
at the same time. Normally, "Wireless" is shown without
wired connection. While using a wired Internet connection,
"Wireless" is disabled and "Wired" is activated.
Confi guring a wired Internet connection
1. Press / to select Network in stop mode, then press
button to enter the following screen:
If the network connection is active, Link Up appears next
to Link Status. If the network connection is not active,
Link Down displays next to Link Status.
2. Press / to select IP Mode, then press OK.
36
3. Press
4. Press
5. Press
This section describes how to confi gure the BD player for
Link up
accessing the internet via a WiFi connection. The procedure
00:23:18:75:b1:2b
for connecting to a wireless network depends on various
Dynamic
network parameters. Read the following configuration
128.60.3.31
methods to determine which instructions to use to connect
to your network.
255.255.0.0
I.
128.60.1.1
128.60.1.41
128.60.1.42
Network Test
II.
III.
Description of the Wireless Network List Display
Choosing "Network List" in the wireless network setup
menu will cause a list of available WiFi networks to appear,
as shown below:
Wired IP Settings
Link Status Link up
MAC Address 00:23:18:75:b1:2b
IP Mode Dynamic
128.60.3.31
IP Address
Subnet Mask 255.255.0.0
Gateway 128.60.1.1
128.60.1.41
Primary DNS
Secondary DNS 128.60.1.42
Apply
Cancel
/ to select an IP mode. You can select:
• Off — Disables the network interface.
• Manual — Lets you manually confi gure network settings,
such as IP address, subnet mask, and gateway settings.
• Dynamic — Uses DHCP to automatically obtain an IP
address.
/ / / to highlight Network Test, and press
OK to test your network connection.
or RETURN to go to the previous menu.
Confi guring a wireless Internet connection
Connection to the wireless Network which you
select
a. Connecting to an Unencrypted Wireless Network
b. Connecting to an Encrypted Wireless Network
Connection to the wireless Network using Wi-Fi
Protected Setup (WPS)
a. Connecting to a Wireless Network Using WPS Pushbutton
b. Connecting to a Wireless Network Using WPS PIN
Connection to the wireless Network using Manual
IP Confi gration
Network List
a
WiFi
WiFi b g n
a
WiFi
WiFi b g
WiFi b g
Network Test
WiFi-me*
Panda
dlink_media
NTGR 11g
Airport_SN