Table of Contents
Advertisement
Function setup
Customizing the Function Settings
You can change the default settings to customize performance to your preference.
General Operations
1. Press
/
to select Settings in home menu while in full
stop mode, the Settings menu appears.
2. Press
button, then use
options.
3. Press OK button.
4. Press
or RETURN button to return to the previous
menu.
Home Menu
Network
Info
BD-ROM
Quick Setup
Settings
Display
Audio
Connected
Speaker
A
Language
Settings menu items
Network Connection Setting
1. Press
/
to select Network in stop mode, the network
connection menu appears.
Wired
Wireless
Network Test
2. Press
button, then use
connection setting.
3. Press OK button.
Confi guring a wired Internet connection
1. Press
/
to select Wired, then press OK to confi rm.
The IP Settings screen appears.
If the network connection is active, Link Up appears next
to Link Status. If the network connection is not active,
Link Down displays next to Link Status.
28
/
button to select the setting
Display
HDMI Status
Connected
HDMI Preferred Format
1080p(HDMI)
Resolution
HDMI Auto
TV Aspect
16:9 Pillarbox
Film Mode
Off
Deep Color
On
submenu display area
/
button to select the desired
IP Settings
Link Status
MAC Address
IP Mode
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
Apply
2. Press
/
to select IP Mode, then press OK.
3. Press
/
to select an IP mode. You can select:
• Off — Disables the network interface.
• Manual — Lets you manually configure network
settings, such as IP address, subnet mask, and
gateway settings.
• Dynamic — Uses DHCP to automatically obtain an IP
address.
4. Press
or RETURN to go to the previous menu.
Confi guring a wireless Internet connection
This section describes how to confi gure the BD player for
accessing the internet via a WiFi connection. The procedure
for connecting to a wireless network depends on various
network parameters. Read the following configuration
methods to determine which instructions to use to connect
to your network.
I.
Connection to the wireless Network which you
select
a. Connecting to an Unencrypted Wireless Network
b. Connecting to an Encrypted Wireless Network
II.
Connection to the wireless Network using Wi-Fi
protected Setup(WPS)
a. Connecting to a Wireless Network Using WPS Pushbutton
b. Connecting to a Wireless Network Using WPS PIN
III.
Connection to the wireless Network using Manual
IP Confi gration
Description of the Wireless Network List Display
Choosing "Network List" in the wireless network setup menu
will cause a list of available WiFi networks to appear, as
shown below:
Network List
a
WiFi
WiFi
b g n
WiFi
a
WiFi
b
g
WiFi
b
g
Link Down
00:23:18:75:b1:2b
Dynamic
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Cancel
WiFi-me*
Panda
dlink_media
NTGR 11g
Airport_SN
Advertisement
Table of Contents
