Identifi Cation Of Controls; Front Panel; Rear Panel - Toshiba BDX3000KU Owner's Manual

Identifi cation of Controls

Front panel

1
(*) Notes:
1. These indicators are located in the sensor fi eld.
2. When this unit is off, these indicators are dimmed. If a fi n-
ger is brought close to the sensor fi eld, the indicators will
be invoked and light up.
1. Disc tray
2. Remote sensor
3. Display
• Refer to "Front Panel Display" on page 10.
4. OPEN/CLOSE indicator
• When invoked (white), tap to open/close the disc tray.
5. STOP indicator
• When invoked (white), tap to stop playback.
6. PLAY indicator
• When invoked (white), tap to start playback.

Rear panel

1 2
AC IN
LAN
1. AC power cord
• Connect to a standard AC outlet to supply power to this
unit.
• Unplug this cord from the AC outlet to completely turn
off the unit.
2. LAN terminal
• Use to connect a network equipment with LAN cable.
3. HDMI OUT jack
• Use to connect a TV with an HDMI compatible port via
an HDMI cable.
4. OPTICAL jack
• Use to connect an AV receiver / amplifi er, Dolby Digital /
DTS decoder or other device with a digital audio optical
input jack using a digital audio optical cable.
2
7. ON/STANDBY indicator
8. SD card slot
How to Power On Your Unit ?
1. Connect to a standard AC outlet to supply power to this
2. After about 10 seconds, the ON/STANDBY indicator will
3. Touch the ON/STANDBY button to turn on the unit. The
3 4 5
COMPONENT VIDEO OUTPUT
SBL
Y P P
B R
SBR
BITSTREAM / PCM R L
VIDEO
ANALOG AUDIO MULTI CHANNEL AUDIO OUTPUT
USB HDMI OUT OPTICAL
OUTPUT
OUTPUT
7 8 9
5. COMPONENT VIDEO OUT jacks
6. MULTI CHANNEL AUDIO OUTPUT jacks
7. USB jack
8. AUDIO OUT jacks
9. VIDEO OUT jack
3 4* 5* 6* 7*
• When invoked (white), tap to turn on the unit, or to turn
the unit into the standby mode. (To completely turn off
the unit, you must unplug the AC power cord.)
unit, the ON/STANDBY indicator lights in red and then
turns white at once.
turn red automatically.
ON/STANDBY indicator will remain white (ON mode).
6
C SL FL
SW SR FR
• Use to connect a TV with component video inputs using
a component video cable.
• Use to connect an AV receiver / amplifi er with a audio
cable.
• Use to connect USB fl ash drives (not included).
• Use to connect a TV, an AV receiver / amplifi er or other
device with a composite audio cable.
• Use to connect a TV, an AV receiver or other device with
a composite video cable.
8
7