Customizing The Function Settings; General Operations; Network Connection Setting; Info Menu - Toshiba BDX2500KU Owner's Manual

Customizing the Function Settings

You can change the default settings to customize performance to your preference.

General Operations

1. Press / to select Settings in home menu while in full
stop mode, the Settings menu appears.
2. Press button, then use
options.
3. Press OK button.
or RETURN button to return to the previous
4. Press
menu.
Home Menu
Network
Info
BD-ROM
Quick Setup
Settings
Display
Audio
Connected
Speaker
A
Language
Settings menu items

Network Connection Setting

1. Press / to select Network in stop mode, the network
connection menu appears.
Wired
Wireless
Network Test
2. Press button, then use
connection setting.
3. Press OK button.
Note: The option Wireless appears only while a wireless
LAN adapter is inserted into the USB slot.
Configuring a wired Internet connection
1. Press / to select Wired, then press OK to confirm.
The IP Settings screen appears.
If the network connection is active, link Up appears next
to Link Status. If the network connection is not active,
link Down displays next to Link Status.
/ button to select the setting
Display
HDMI Status Connected
HDMI Preferred Format 1080p(HDMI)
Resolution HDMI Auto
TV Aspect 16:9 Pillarbox
Film Mode Off
Deep Color On
submenu display area
/ button to select the desired
IP Settings
Link Status
MAC Address
IP Mode
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
Apply
2. Press / to select IP Mode, then press OK.
3. Press / to select an IP mode. You can select:
• Off — Disables the network interface.
• Manual — Lets you manually configure network
settings, such as IP address, subnet mask, and
gateway settings.
• Dynamic — Uses DHCP to automatically obtain an IP
address.
4. Press or RETURN to go to the previous menu.

Info Menu

This menu displays the following information:
• Software Version
• Software Date
1. In the main menu of Settings, press
/ button to select Info to display the version information
on software and hardware.
or RETURN to go to the previous menu.
2. Press

Performing Quick-Setup

1. In the main menu of Settings, press
/ button to select Quick Setup, and then press OK
to confirm.
OK to perform Quick Setup
2. Press
To exit the setup menu:
• Use button to highlight "No thanks. I'll go through the
full setup menu later", and then press OK.
• Or press button directly.
3. Follow the on-screen instructions to customize the
following settings to your preference:
• OSD language Settings
• TV Aspect
4. After setting, press OK to confirm and exit the setup.
Link Down
00:23:18:75:b1:2b
Dynamic
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Cancel
• Netflix ESN
button, then use
button, then use
.
• Resolution
29