Table of Contents
Advertisement
Function setup
Customizing the Function Settings
Done
1
2 3 4 5 6 7 8 9 0
q w e r t y u i o p
a s d f g h j k l ;
z
x c v
` - =
Space
4. Use / / / to highlight
of the keyboard, and press OK to remove the keyboard
from the screen.
5. Use
to highlight Connect, and press OK. If the
wireless network is functioning,
"Connection to XXX...Success" will appear on the TV.
6. Press OK to close the message. The BD player is now
connected to the network. From now on, when you turn
on the player, it will automatically connect to the network;
there is no need to repeat these steps again.
Notes:
•
If you do not see this message, the BD player was not
able to connect to the network.
•
If the wireless network is
unsupported encryption (it appears in the network
list with an icon), you cannot connect to the network.
You must change the router's encryption type before
proceeding.
II.
Connection to the wireless Network using Wi-Fi
protected Setup(WPS)
1. Press
/
to select Network in stop mode, then press
button to enter the following screen:
Wireless
Network List
WiFi Protected Setup (WPS)
Manual
IP Settings
a. If the BD player is connected to a Wireless Network
Using WPS Pushbutton:
2. Press
/
to select WiFi Protected Setup (WPS), then
press OK.
WiFi Protected Setup (WPS)
Please press the button on your router now
Network Name (SSID)
38
b n m , . /
[ ] '
\
on the upper-right corner
Done
icon and a message
encrypted using an
Cancel
3. Press the WPS button on the top of your router.
4. Once you see "Success" on the button at the bottom of
the screen, the BD player is connected to the router.
Note: If you do not see this message, the BD player was not
able to connect to the network. Repeat steps 1-4 again.
b. If the BD player is connected to a Wireless Network
Using WPS PIN:
2. Press
/
to select Network List, then press OK. A
list of existing wireless networks near the BD player will
appear (It may take several seconds for this list to be
created). For example:
Network List
a
WiFi
WiFi
b g n
a
WiFi
b
g
WiFi
WiFi
b
g
3. Press
/
to select the desired wireless network, and
press OK to confi rm.
4. Press
/
to highlight WPS PIN, and press OK. The
following screen will appear:
WiFi-me
Password
Connect
WPS Pin
Press ENTER to open keyboard
Password is case-sensitive
5. Press
/
to highlight connection method you desire,
and press OK.
6. Follow the on-screen message to continue operating the
connection.
III.
Connection to the wireless Network using Manual
IP Confi gration
1. In the "Wireless" menu, press
then press OK.
Wireless
Network List
WiFi Protected Setup (WPS)
Manual
IP Settings
2. Follow the on-screen message to continue operating the
connection.
WiFi-me*
Panda
dlink_media
NTGR 11g
Airport_SN
Cancel
/
to select Manual,
Advertisement
Table of Contents
