Table of Contents
Advertisement
Introduction
Operating with the remote control
Point the remote control at the remote
sensor and press the buttons.
Front Panel Display
9
10
1. PLAY indicator
Lights when playing.
2. PAUSE indicator
Lights when paused.
3. DVD indicator
Lights when a DVD disc is inserted.
4. CD indicator
Lights when a CD disc is inserted.
5. TRK (TRACK) indicator
Lights when a CD/MP3 disc is inserted.
6. Audio Channel indicator
Shows the audio channel of the current DVD/BD.
7. HDMI indicator
Lights when HDMI TV is connected.
8.
(REPEAT) indicator
Illuminates when REPEAT is pressed.
9.
/
SKIP indicator
Lights while in fast forward / fast reverse mode.
10
Distance:
About 5 m from the
front of the remote
sensor.
Angle:
About 30° in each
direction of the front of
the remote sensor.
1
2
3
4
5
DVD
CD
1080ip
720p
480ip
* Do not expose the remote sensor of the Blu-ray disc player
to a strong light source such as direct sunlight or other
illumination. If you do so, you may not be able to operate
the Blu-ray disc player via the remote control.
Notes:
• Direct the remote control at the remote sensor of the Blu-ray
disc player.
• When using the remote control, press the buttons at intervals
of about 1 second to ensure the correct mode of operation.
• Do not drop or give the remote control a shock.
• Do not leave the remote control near an extremely hot or humid
place.
• Do not spill water or put anything wet on the remote control.
• Do not open the remote control.
• If the remote control is not going to be used for a long time,
remove the battery to avoid damage caused by battery leakage
corrosion.
6
7
8
TRK
HDMI
2 c h
MULTI
11
10. Resolution indicator
Shows resolution of video output.
11. Character indicators
Displays various kinds of information such as elapsed time
or message, etc. (See Example shown as below.)
Indicates the
elapsed time
Closing the
disc tray
Indicates that a
Blu-ray disc is
inserted
Loading a disc
Advertisement
Table of Contents
