Cochlear Baha 5 Quick Start Manual page 2

Wireless Pairing & Streaming – Cochlear
Phone Clip – Pairing with ReSound hearing aid or Baha 5 sound processor
1. 2.
Turn off ReSound hearing aid
or Baha 5 sound processor
or
Phone Clip – Pairing with Mobile Phone
2.
1.
Turn on Phone Clip and
remove silver cover
Switch on
Remove cap
Phone Clip – Managing Calls
Incoming calls:
To answer a call, press once.
To decline a call, double-click.
During a call:
To transfer a call started on your phone to the phone
clip, press once
To put a call on hold, press and hold for 2 seconds.
To make a call:
To redial the last number, double-click.
To activate voice dialling, press and hold for 2 seconds.
3.
Turn on Phone Clip and Press pairing button
remove silver cap
Note: Ensure
Phone Clip
is charged.
Switch on
Remove cap
Note: The Phone Clip must be paired to a
Bluetooth source before it can be used.
3.
Turn on mobile phone's Press blue Bluetooth
Bluetooth function pairing button
Refer to your mobile phone
user guide for instructions.
Phone Clip – Streaming Music
Connect the device to the Phone Clip using Bluetooth.
Start playing music on the device.
You hear the audio streaming from the device.
To stop streaming, stop playing music on the device.
Tip! Use the volume
controls on the
Phone Clip to change
the volume on your
hearing aid.
Baha 5 and ReSound
™ ®
Note: Phone Clip can not be paired bimodally.
20
seconds
Note: The LED will flash yellow
for 20 seconds while device is
in pairing mode.
2
minutes
Note: During pairing mode
the LED will turn blue.
www.cochlear.com
© Cochlear Limited 2015. All rights reserved. Hear now. And always and other trademarks
and registered trademarks are the property of Cochlear Limited or Cochlear Bone Anchored
Solutions AB. The names of actual companies and products mentioned herein may be the
trademarks of their respective owners.
© 2015. The GN ReSound Group, all rights reserved. ReSound and ReSound Unite are
trademarks of the GN ReSound Group.
D797653 ISS2 MAY16
®
4.
Turn on ReSound hearing aid
or Baha 5 sound processor
or
4.
On your mobile phone search for
new Bluetooth devices and select
"Hearing Aid Phone" from the list.
Note: If your mobile phone asks for a pass code,
enter "0000" (four zeros).
Your Phone Clip should now be paired with
your mobile phone.
Note: If your mobile phone asks which Bluetooth
service you wish to enable, select "Headset".
www.resound.com