Shock Sensor Alarm - REWIRE SECURITY 102-NANO User Manual

e.g.
clear123456
Logging Volume: The tracking device has a built-in flash 1MB (~16,000 positions)
but this can be increased by adding a Micro SD card to the slot located under the
SIM Card Slot. A 2 GB Micro SD card is sufficient to record location data for up to
10 months. Data Logging function also enables you to use this tracker as a GPS
Logger. You can download the location data to your PC by using the free PC
software provided through USB connection.

5.12 Shock Sensor Alarm

Shock sensor alarm is deactivated by default. To activate:
Command: shock+password
Response: Shock is activated!
e.g.
shock123456
Now when 102-NANO detects vibration, it will send SMS "Sensor
alarm+location" to the authorized numbers. To cancel shock sensor alarm:
Command: noshock+password
e.g.
noshock123456
Shock sensor sensitivity configuration:
The shock sensor module has three different sensitivity settings;
First Level: Alarm will be triggered after detecting single vibration.
Command: sensitivity+password+space+1
e.g.
sensitivity123456 1
Second Level: Alarm will be triggered after detecting 8 vibrations in 2 seconds.
Command: sensitivity+password+space+2