To switch back to tracker mode:
Command: tracker+password
Response: tracker ok!
e.g.
tracker123456
5.11 Data Logging
Auto logging:If the 102-NANO loses GSM or GPRS signal, it can store the
tracking position and alerts automatically on the flash drive upon the pre-set
conditions. When GSM reception is re-established, all the event alerts will be
auto-sent to the authorized numbers or online tracking server.
Logging at preset intervals:
Command: save030s005n+password
Response: save ok
e.g.
save030s005n123456
Once set, 102-NANO will store the latitude, longitude locations every 30 seconds
for 5 times. (S: second, m: minute; h: hour).
Continuous logging:
Command: save030s***n+ password
Response: save ok
e.g.
save030s***n123456
Logging Clearance:
Command: clear+ password
Response: clear ok
Need help?
Do you have a question about the 102-NANO and is the answer not in the manual?