Adding and erasing channels manually
After you have automatically programmed all active channels into the
TV's memory, you can manually add and erase individual channels.
To add or erase a channel in the TV's memory:
1. Tune the TV to the channel you want to add or erase. If you are
adding a channel, you will need to use the CHANNEL
NUMBERS to select the channel.
2. Press MENU.
to highlight the SET UP menu.
to highlight ADD/ERASE.
[ENGLISH] FRANCAIS ESPANOL
to highlight ADD or ERASE, whichever function
you want to perform.
6. Press MENU.
7. Repeat steps 1–6 for other channels you want to add or erase,
or press EXIT to return to normal TV viewing.
To change to the next programmed channel:
To change to a specific channel (programmed or unprogrammed):
Press the CHANNEL NUMBERS (0–9 and 100).
Note: For channels 100 and higher, press the 100 button, and
then the next two channel numbers (for example, to select
channel 100, press 100, 0, 0; to select channel 125, press
100, 2, 5).
Image tilt correction
When you install or change the direction of the TV, the picture may
become tilted (caused by the Earth's magnetism). If this happens, use
the image tilt correction feature to obtain the best possible picture.
To adjust the image tilt:
1. Press MENU, and then press
to highlight IMAGE TILT.
to adjust the picture tilt (from –10 to +10).
until the SET UP menu
yz x •