Table of Contents
Advertisement
3. Press • or • to highlight TV/CABLE.
4. Press • or _. to highlight TV (if you use an antenna) or CABLE
(if you use cable).
5. Press • to highlight CH PROGRAM.
SET UP
LA_GUAGE
[EN_L]{S_]
_RAN(A_S
ESPANOI
LtKW*.I;t I
LvL :7::
V-CHZP _O_,_T_O L
_4ORE
HOVE [vA]
SELECT [ 4 D']
SET UP
LANGUAGE:
ENGL_S_t]
}RANCA:{S
E£PANOt
_V/CABL_
{Tv] C;_K _
v cHI_ CONgRO£
MOVE [VA]
SELECT [ 4 I']
6. Press • or i_ to start automatic channel programming
("CH PRO-
GRAM" displays on-screen). The TV automatically cycles through
every TV or cable channel (depending on which you selected), and
stores all active channels in the TV's memory.
7. When automatic channel programming
is complete, the message
"CH Programming Completed" appears.
8. Press
CHANNEL _v
to view the programmed channels.
Adding and erasing channels
manually
After you have automatically programmed the channels into the TV's
memory, you can manually add and erase individual channels.
To add a channel to or erase a channel from the TV's memory:
1. Tune the TV to the channel you want to add or erase. If you are
adding a channel, you will need to use the CHANNEL
NUMBERS to select the channel.
2. Press MENU.
3. Press • or i_ to highlight the SET UP menu.
4. Press • or • to highlight ADD/ERASE.
@@@@©
SET UP
LANgUAGe:
V-CHIP CONTROL
HOVE[_
A]
SELECT[4
_]
5. Press • or i_ to highlight ADD or ERASE, whichever function you
want to perform.
6. Press MENU.
7. Repeat steps 1-6 for other channels you want to add or erase,
or press EXIT to return to normal TV viewing.
Changing channels
To change to the next programmed channel:
Press CHANNEL ••.
To change to a specific channel (programmed
or unprogrammed):
Press the CHANNEL NUMBERS
(0-9 and 100).
Note: For channels 100 and higher, press the 100 button, and then
the next two channel numbers (for example, to select channel 100,
press 100, 0, 0; to select channel 125, press
lOO, 2 , 5).
RECALL
MUTE
®
--
CHANNEL
NUMBERS
--
MENU
--
EXIT
Page 17
Advertisement
Table of Contents
