Adding Channels To The Tv's Memory; Programming Channels Automatically; Adding And Erasing Channels Manually; Changing Channels - Toshiba 14AF46C Owner's Manual

Adding channels to the TV's memory
Your TV will stop on specific channels that are stored in the TV's
channel memory when you press Channel + or -. Use the steps below
to set all active channels in your area automatically.
Programming channels automatically
Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase specific channels manually.
To add channels automatically:
1. Press MENU, then press { or > to display the SETUP menu.
2. Press ^ or v until the TV/CABLE
selection is highlighted.
3. Press { or > to highlight either TV
or CABLE, depending on which
you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
_TV CABLE
CR PROGRAM START •
ADD/ERASE ADD
SELECT AV ADJUST 4 1_
4. Press v to select CH PROGRAM.
5. Press { or > to start channel programming. The TV will automati-
cally cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
"PROGRAMMING NOW-PLEASE WAIT" appears.
6. When channel programming is complete, the message "COMPLETED"
appears.
7. Press CH + or - to view the programmed channels.
Channel
Numbers
Channel +/-
^V {>
Menu
Adding and erasing channels manually
After you have programmed the channels automatically, you can add
or erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase.
If adding channels, you must select the channel to add using the
Channel Number buttons.
2. Press MENU, then press { or > to
display the SETUP menu.
3. Press ^ or v to highlight ADD/
TV/DABLE CABLE
ERASE.
CH PROGRAM START •
4. Press { or > to select ADD or _,AO0 ERASE
ERASE, whichever function you
want to perform.
SELECT Ay ADJUST 4 I_
5. Repeat steps 1-4 for other
channels you want to add or erase.
Changing channels
To change to the next programmed channel:
Press Channel • or • on the TV or CH + or - on the remote
control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons _0-9 and 100) on the remote
control.
For example, to select channel 125, press 100, 2, 5.
13