Adding Channels To The Tv's Memory; Programming Channels Automatically; Adding And Erasing Channels Manually; Changing Channels - Toshiba FSTPURE ColorStream 14AF42 Owner's Manual

Adding channels to the TV's memory
Your TV will stop on specific channels that are stored in the TV's
channel memory when you press Channel + or -. Use the steps below
to set all active channels in your area automatically.
Programming channels automatically
Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase channels manually.
To add channels automatically:
1. Press MENU, then press • or • to display the SET UP menu.
2. Press • or • until the TV/CABLE
selection is highlighted.
3. Press • or • to highlight either
TV or CABLE, depending on
which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
J i ¸
__V CABLE
CH PROGRAM
SELECT AV ADJUST _11_
4. Press • to select CH PROGRAM.
5. Press • or • to start channel programming. The TV will automati-
cally cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
"PROGRAMMING NOW PLEASE WAIT" appears.
6. When channel programming is complete, the message "COMPLETED
(channel or cable number)" appears.
7. Press Channel • or • to view the programmed channels.
Channel +/-
Av<l_
Menu
Exit
Adding and erasing channels manually
After you have programmed the channels automatically, you can add or
erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase.
If adding channels, you must select the channel to add using the
Channel Number buttons.
2. Press MENU, then press • or •
to display the SET UP menu.
3. Press • or • to highlight ADD/
ERASE.
4. Press • or • to select ADD or
ERASE, whichever function you
want to perform.
5. Repeat steps 1-4 for other
channels you want to add or erase.
TV/CABLE TV
CH PROGRAM START I_,
ill _ __ i _iii _ _ii_ i
SELECT AV ADJUST 4 I_
Changing channels
To change the channel, you can:
• change the programmed channels using the remote control
• select a channel directly using the remote control
• scan the channels using the TV buttons
To change to the next programmed channel:
Press Channel + or - on the TV or remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100).
For example, to select channel 125, press the 100 button, the 2
button, and the 5 button.
Channel
Numbers
Channel +/-
Av<P,
Menu
Exit
12