43HX71
TV front panel
Adding and erasing channels
manually
After you have programmed the channels automatically, you can
manually add or erase specific channels.
To add or erase channels:
1. Select the channel you want to add or erase. If you are adding a
channel, you must select the channel using the Channel Number
buttons.
2. Press MENU, and then press • or • until the SET UP menu
appears.
3. Press • or • to highlight ADD/ERASE.
®®®®@@
O
SET
UP
LANGUAGE
ENGL I SH
CLOCK
SET
00:00
ANT 1 / 2
ANT 1
TV/CABLE
CABLE
CH
PROGRAM
)"
4. Press • or • to select ADD or ERASE, depending on the
function you want to perform.
5. Repeat steps 1-4 for other channels you want to add or erase.
Changing channels
To change to the next programmed channel:
Press Channel • or • on the TV or remote control.
To change to the specific programmed channel:
Press and hold Channel • or • for about one second. The TV
will enter the channel surf mode.
Upper channels
1"
Current
channel
.L
Lower channels
Channel
label (if set)
MENU
AT4 _,"
Channel AT
53HX71
MENU
ACH
EXIT
WNIDEO
TOUOHFOCUS
MENU
AV4_-
Channel
AT
Repeatedly press or hold channel • or • while the channel surf
mode is on-screen to scroll the channel list. Release the button to
display the highlighted channel.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100).
For channels 100 and higher, press the 100 button, and then the
next two numbers. For example, to select channel 125, press
100, 2, 5.
HHH
ili 'iii il 'ii i 'i i 'i
iiiiii
25