Adding And Erasing Channels Manually; Changing Channels - Toshiba 36HF72 Owner's Manual

(Continued from previous page)

Adding and erasing channels manually

After you automatically program the channels into the channel
memory (see previous page), you can manually add or erase specific
channels.
To manually add or erase channels:
1. Select the channel you want to add or erase. If you are adding a
channel, you must select the channel using the Channel Number
buttons on the remote control.
2. Press MENU, and then press x or • until the SET UP menu
appears.
3. Press y or z to highlight ADD/ERASE.
SET UP
LANGUAGE:
[ENGLISH] FRANCAIS ESPANOL
TV/CABLE: [TV] CABLE
CH PROGRAM
ADD/ERASE: [ADD] ERASE
MORE
SELECT [ ]
MOVE [ ]
4. Press x or • to select ADD or ERASE, depending on the
function you want to perform.
5. Repeat steps 1–4 for other channels you want to add or erase.

Changing channels

To change to the next programmed channel:
Press Channel y or z on the TV or remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Numbers (0–9 and 100).
For channels 100 and higher, press the 100 button and then the
next two numbers. For example, to select channel 125, press
100–2–5.
20
Channel
Numbers
yzx •
MENU
EXIT
Channel yz
Channel zy
TV front panel
DEMO MENU TV/VIDEO VOLUME CHANNEL
x •zy
MENU