General / Type Series And Accessories - janitza Prophi 12R Manual

Prophi 12R / 12 RS
®
Section1 General
The power factor controller Prophi 12 (single phase) enlarges the product range of power
factor control devices by a useful combination of the well known features with the
advantages of a better visualization.
The big graphic display enables a user-friendly programming and gives further benefits
such as larger display in the Display-mode and the display of various parameters in
bargraph-mode.
With the additional "ESCAPE"-button a backward navigation in all menus is possible.
The "HELP"-button
(German/English).
The controller is characterized by its user friendly operating interface via menu driven
plain text display. The display of several grid parameters, the storage of different values
as well as the possibility of test run allow a simple error analysis and system monitoring.
If required, an automatic initialization is possible which reduces the start-up operation to
a minimum.
12 respectively 13 switching outputs
R
Extended supply-voltage range 110...440V
R
20 pre-programmed control series with self optimized intelligent control behavior
R
Control series editor for individual control series
R
Operation and display completely menu-driven
R
Illuminated graphic display 128 x 64 dots
R
4 quadrant operation
R
Automatic initialization possible
R
Display of several grid parameters also in large letters
R
Display of harmonics of voltage and current, also as bar diagram
R
Display and monitoring of temperature
R
Monitoring of the particular capacitor output
R
Storage of maximum values of grid parameters as well as switching operations
R
and switch-in times of particular capacitor contactors
Manual/automatic operation
R
Programming of fixed steps or skipping of single outputs possible
R
Zero voltage switch off
R
Error display of different states and alarm output (relay)
R
Error storage
R
Test run of the system with error analysis
R
Panel-mounted instrument 144 x 144 x 53 mm
R
Firmware update possible
R
Version with interface only:
additional external input (function programmable), e.g. for 2nd parameter set
R
additional freely programmable alarm relay, e.g. for fan, status notification
R
serial interface RS485, for controller coupling, integration into networks
R
visualization, programming and data processing via PC by enclosed software
R
Parameterization of the controller via PC
R
Usage as system interface
R
Usage with accessory MMI6000/MMI7000 for real current or remote measuring
R
Connection of system accessory (e.g. datalogger)
R
4
allows an interactive
- 3 -
help in the particular menu item