Alarm And Status Notifications - janitza Prophi 12R Manual

Alarm- and status messages in the display
AUTO MODE
------------------
j
cos 0.987 IND
1 2 3 4 5 6 7 8 9 10 11 12
Display of status:
2. parameter set active
2
Display of present controller status in case a mixed compensation CAP/IND
IND
(Switching of capacitive or inductive steps)
CAP
See ExpertMode 1:
In case of controller coupling or extension of systems (several controllers)
MASTER
according to the applications shown in applications page 27/28 the respective
message is displayed (Master/Slave) as soon as the connection has
SLAVE
successfully been established and the communication works without fault.
Display of alarm and message relay functions
Programming of alarm relay in:
Programming of message relay in:
Display of error summary report
A
(relay programmed as ERROR resp. ERROR inverse)
F
Display FAN-ON (relay programmed : „FAN")
Display SUPPLY real power (relay programmed: „SUPPLY")
U
Display UNDERCURRENT
H
HARMONICS
OC
OVERCOMPENSATED
UC
UNDERCOMPENSATED
SWITCHING OPERATIONS (number of programmed switch. oper. exceeded)
ME
MODBUS-ERROR or MMI-ERROR
C-DEFECT
13. step (programming only possible for the alarm-relay)
Status indication (s.table)
IND
2
A F
Message occurs in case of error resp.
A M
relay is active (s.table)
Message relay was parameterized with a function
(only version /RS)
Alarm relay has been parameterized with a function
19 CONTROL
PROGRAMMING: 14 ALARM RELAY
INTERFACE: 1 MESSAGE RELAY
- 30 -
Prophi
®
CAP
MASTER SLAVE
U H OC UC ME
12R / 12 RS
31