Advanced Network Setup - Toshiba 40SL500U Owner's Manual

Advanced Network Setup

Note:
• When the DHCP function of the router connected with
this TV is On, you can set Auto Setup to On or Off.
• When the DHCP function of the router is Off, set Auto
Setup to Off and manually set the IP Address or DNS
Address.
IP Address Setup
Auto Setup:
1
From the PREFERENCES menu, highlight
Network Setup and press
2
Press B or b to highlight Advanced Network
Setup, and press .
O K
3
Press B or b to highlight IP Address Setup, and
press .
O K
4
Highlight Auto Setup, and then press C or c to
select On.
Note: Other items will be grayed out when Auto Setup is
set to On.
Manual Setup:
1
From the PREFERENCES menu, highlight
Network Setup and press
2
Press B or b to highlight Advanced Network
Setup, and press .
O K
3
Press B or b to highlight IP Address Setup, and
press .
O K
4
Highlight Auto Setup, and then press C or c to
select Off.
5
Press B or b to highlight IP Address.
6
Press C or c to highlight the field you want to
change, and then use the number buttons to input
the IP address. To save the setting, press
Note:
• IP address field numbers must be between 0 and
255. If you input an incompatible number and press
, the field number will reset to the previous value.
O K
7
Press B or b to highlight Subnet Mask, and edit in
the same way as IP Address.
Note: If you manually set the IP address, you must not use
the same IP address for any other device. The IP address
you use should be a private address. If you do not know
the correct values to use, please contact your network
administrator.
Chapter 8: Advanced features
.
OK
.
OK
.
OK
MAC Address
You can view the fixed MAC address for the TV and for
the Dual Band WLAN Adapter, if one is installed.
1
From the PREFERENCES menu, highlight
Network Setup and press
2
Press B or b to highlight Advanced Network
Setup, and press .
OK
3
Press B or b to highlight MAC Address, and press
.
OK
.
OK
67