Toshiba 40SL500U Owner's Manual page 71

Using Media Player with DLNA CERTIFIED
You need to configure a home network before using this
feature (- page 21).
1
From the APPLICATIONS menu, highlight Media
Player, and then press
2
Press C or c to select Photo, Movie, or Music and
press . The thumbnail (for Photo) or list of files
O K
(for Movie and Music) will appear.
Note: If there is more than one media server on the
network, a list of all media servers will be displayed.
Highlight the server you want to use, and press
3
Press B or b to select DMS if the selection window
is displayed.
To select a file in the list of contents:
1
Press B, b, C or c to select a file or folder.
2
Press to move to the next layer, or press
O K
return to the previous layer.
To close the Media Player:
Press . The TV will return to the last-viewed channel
EXIT O K
or video input.
Chapter 8: Advanced features
™ Server
.
O K
.
OK
to
RETURN
To set the Media Server Setup:
You only need to complete the Media Server Setup if
you want to memorize DMS to be woken up later by the
TV.
1
From the APPLICATIONS menu, highlight Media
Player, and then press
2
Press B or b to highlight Setup, and press
3
Press B or b to highlight Media Server Setup, and
press . The list that contains the currently active
OK
DMSs and the registered DMSs will appear.
4
Press B or b to select the desired device, and press
. A check will appear in the box. To remove the
OK
check, press again.
OK
5
Press c to highlight Done, and then press
Note:
• The setting is not saved when
Done is pressed.
• Up to 8 DMSs can be selected.
• Even if the device checked is power-off, it is displayed
but grayed out in the Select Device window. When
pressed on a highlighted grayed out item, a confirmation
of Wake-on-LAN is displayed. The TV tries to wake up the
DMS if Yes is pressed. The Server will start if it supports
Wake-on-LAN feature.
• Depending on the hardware and software settings of the
Media Server, it may not start even if Wake-on-LAN is set.
• When some DMSs are connected, it may take time until
the list is displayed. The list may be smoothly displayed
by the following operation.
- The device selection window is closed once and it is
displayed again.
- The RED button is pressed.
.
OK
.
OK
.
OK
is pressed before
RETURN
OK
71
is