Automatic Power Down; No Signal Power Down; Power-On Mode; Blue Screen - Toshiba 40SL500U Owner's Manual

Automatic Power Down

The TV will automatically turn itself off (standby) after
4 hours, if you do not operate the TV either from the
remote control or the TV control panel.
1
From the PREFERENCES menu, highlight Energy
Saving Settings and press
2
Press B or b to select Automatic Power Down.
3
Press C or c to select On or Off, and press
Note:
• This feature is set to On when Location is set to Home.
• 1 minute before switching to standby, a warning
message will appear.
• When the following features are set, the feature that is set
for the nearest time will function.
– Automatic Power Down
– Sleep Timer
– Photo Frame/Auto Power Off
– Auto shutdown after 1 hour of inactivity (after power-
on by On Timer)
– No signal auto power off (after 15 minute of no signal)

No Signal Power Down

The TV will automatically turn itself off after 15 minutes
when no signal is detected.
You can change the setting to Off for the following
purposes:
•low signal strength of analog channel (no signal
detection)
•Only Audio L/R is connected to external input to
listen to music through the TV speakers.
1
From the PREFERENCES menu, highlight Energy
Saving Settings and press
2
Press B or b to select No Signal Power Down, and
press .
EXIT EXIT O K O K
3
Press B or b to highlight the item you want to
change, and press C or c to select On or Off.
Note:
• Default setting is all On.
• A warning message will appear 1 minute before turning
off.
52
Chapter 6: Basic features
.
OK
.
EXIT
.
OK

Power-On Mode

You can select either Power-Saving or Fast mode.
•Power-Saving mode keeps power consumption in
standby mode to below 1W. As a result, it takes a bit
longer for the TV to turn on.
•Fast mode increases power consumption in standby
mode. As a result, the TV will turn on more quickly.
1
From the PREFERENCES menu, highlight Energy
Saving Settings and press
2
Press B or b to select Power-On Mode.
3
Press C or c to select either Power-Saving or Fast,
and then press .
EXIT
Select Power-Saving for optimal energy efficiency.

Blue Screen

When Blue Screen is set to On, the screen will turn blue
and the sound will be muted on analog channels and
external input modes when no signal is received.
1
From the PREFERENCES menu, highlight Blue
Screen.
2
Press C or c to select On, and press

TOSHIBA Illumination

You can set the illumination mode of the TOSHIBA logo
located on the front panel to On or Off.
1
From the PREFERENCES menu, highlight
TOSHIBA Illumination.
2
Press C or c to select either On or Off, and then
press .
EXIT
.
OK
.
EXIT