Toshiba 40SL500U Owner's Manual page 69

Media Renderer
1
From the PREFERENCES menu, highlight Media
Renderer Setup and press
2
Press B or b to highlight Media Renderer, and
then press C or c to select On or Off.
Device Name Setup
The device name as a DMR can be changed. The set
device name can be confirmed from the DMC.
1
From the PREFERENCES menu, highlight Media
Renderer Setup and press
2
Press B or b to highlight Device Name Setup, and
press .
O K
3
Highlight the Device Name field and press
Software Keyboard window will appear.
4
Input the Device Name by using the Software
Keyboard (- page 68). To save your setting, press
the BLUE button.
Note: The Device Name can be up to 127 characters
long.
5
Highlight Done, and then press
Web Password Setup
This sets a password that is used when accessing the
built-in webpage of the TV's DMR.
1
From the PREFERENCES menu, highlight Media
Renderer Setup and press
2
Press B or b to highlight Web Password Setup,
and press .
O K
3
Highlight the Password field and press
Software Keyboard window will appear.
4
Change the password by using the Software
Keyboard (- page 68), and then press the BLUE
button.
Note:
• The Web Password can be up to 15 characters long.
• Only the password can be changed. User ID cannot
be changed.
5
Highlight Done, and then press
Note:
• Some DMCs can view or modify the device name of the
DMR.
• Depending on the TV's state, the device name may not
be able to set from Web page.
• Confirm the DMC's instruction manual for the way of
accessing Web pages.
Chapter 8: Advanced features
.
O K
.
O K
. The
OK
.
OK
.
O K
. The
OK
.
OK
Media Controller Setup
You can limit which DMC can control this TV.
If Access Control is enabled, only those DMCs with a
check will be allowed to control the TV.
1
From the PREFERENCES menu, highlight Media
Renderer Setup and press
2
Press B or b to highlight Media Controller Setup,
and press .
OK
3
Press B or b to highlight Access Control, and then
press C or c to select On.
4
Press B or b to highlight Select Media Controller,
and press .
OK
5
Press B or b to highlight the item you want to
accept, and press . A check will appear in the box.
OK
To remove the check, press
6
Press c to highlight Done, and then press
Note:
• You can select up to 8 DMC devices.
• If you would not like to limit the DMCs for this TV, set
Access Control to Off.
• Devices other than DMC may be displayed in the list.
Confirm the MAC address of DMC and set it.
Maximum Volume Setup
This feature allows you to set the maximum volume of
the TV when it receives volume operation commands
from a DMC.
1
From the PREFERENCES menu, highlight Media
Renderer Setup and press
2
Press B or b to highlight Maximum Volume Setup,
and press C or c to adjust to the desired volume.
Note:
• The TV's remote control can set volume regardless of the
value of Maximum Volume Setup.
• When DMR playback is ended, the TV volume will return
to the value in effect when DMR playback is started.
Note:
• Cookie is the technical information that a website leaves
in this TV so that the website will recognize you when you
use it again.
• Cache is a system used to shorten the display time by
checking the past data preserved in this television when
a page that you viewed before is seen again.
.
OK
again.
OK
.
OK
.
OK
69