Toshiba 40SL500U Owner's Manual page 66

Manual Setup
1
From the PREFERENCES menu, highlight
Network Setup and press
2
Press B or b to highlight Wireless Setup, and
press .
O K
3
Press B or b to highlight Manual Setup, and press
.
O K
4
Press B or b to highlight Network Name, and
press . The Software Keyboard window will
O K
appear.
5
Input the Network Name by using the Software
Keyboard (- page 68). To save your setting, press
the BLUE button.
6
Press B or b to highlight Authentication, and then
press C or c to select Open System, Shared Key,
WPA-PSK or WPA2-PSK.
7
Press B or b to highlight Encryption, and then
press C or c to select None, WEP, TKIP or AES.
Note:
• Certain encryption types are only compatible with
specific authentication types.
-When Authentication is Open System, only WEP or
None is compatible.
-When Authentication is Shared Key, only WEP is
compatible.
-When Authentication is WPA-PSK or WPA2-PSK,
only TKIP or AES is compatible.
• When incompatible Authentication/Encryption
pairings are attempted, a warning message will be
displayed, and no connection attempt will be made
until the incompatibility is resolved.
• Key ID of WEP encryption to set is only one.
8
Press B or b to highlight Security Key, and press
. The Software Keyboard window will appear.
O K
9
Input the Security Key by using the Software
Keyboard (- page 68). To save your setting, press
the BLUE button.
Note: This item is grayed out when Encryption is
None.
10
Highlight Done, and then press
Note: When Encryption is None, a message will
appear. Press C or c to select Yes and press
Note: Settings are not saved if
is selected.
66
Chapter 8: Advanced features
.
OK
.
O K
.
OK
is pressed before Done
RETURN
Wireless Information
The settings configured in Wireless Setup can be
confirmed.
Note: This feature is available when AP connection in
Wireless Setup has been successfully completed and the
Media Player with DLNA CERTIFIED
Wireless LAN.
1
Press to open the Quick menu.
QUICK
2
Press B or b to select Wireless Information and
press .
OK
3
After checking the AP connection, a Wireless
Information window will appear.
Note: Press the RED button if you confirm the situation
of surrounding APs.
Item Description
Connected is displayed when the TV is
connecting with the AP.
Status
Disconnected is displayed when the
TV is disconnecting with the AP.
Connection signal strength with AP
Signal
(STRONG/MEDIUM/WEAK)
Speed The link speed with AP
Mode Working mode (11a, 11b, 11g, 11n)
Channel A channel in use (1-165)
Network Name SSID set
Authentication Authentication set
Encryption Encryption set
Security Key Security Key set
AP MAC The AP's MAC address is displayed
Address when the TV is connecting with AP.
USB MAC
The MAC address of USB (Dual Band
Address WLAN Adapter) is displayed.
Enabled is displayed when you use
DHCP.
DHCP
Disabled is displayed when you do not
use DHCP.
IP Address
The TV's IP address
Subnet Mask Value of the Subnet Mask
Default
Address of the Default GATEWAY
Gateway
DNS
Address of the DNS
Note: Even if AP for IEEE 802.11n is used when
Encryption is set to WEP or TKIP, the Speed value might
be low. Encryption is recommended to be changed to
AES (- left-hand column).
™ Server is used via