Setting Up The Network; Wireless Setup - Toshiba 40SL500U Owner's Manual

Setting up the Network

You can select the Network Type.
1
From the PREFERENCES menu, highlight
Network Setup and press
2
Press B or b to highlight Network Type, and then
press C or c to select Wired or Wireless.
Note: If the Dual Band WLAN Adapter is not
connected, Wireless cannot be selected.
3
If you select Wired, see "Advanced Network Setup"
on page 67.
If you select Wireless, see the next column.

Wireless Setup

Note:
• This feature is grayed out when the Dual Band WLAN
Adapter is not connected or Network Type is set to
Wired.
• Continued connection of AP (Access Point) is not
guaranteed. The connection may be disconnected while
watching TV.
• Do not remove the Dual Band WLAN Adapter while
changing the settings of the wireless connection or
communicating.
There are 3 methods for wireless setup:
•Easy Setup (WPS)
If AP corresponds to WPS, this can be used.
– WPS (Wi-Fi Protected Setup
to execute the connection of wireless LAN equipment
and the setup of security easily. WPS will
automatically configure all wireless settings.
•Assisted Setup (setup by using AP's notification
information)
Network Name, Authentication, and Encryption are
decided based on information from AP. You manually
set Security Key.
•Manual Setup (to input all settings)
Easy Setup using PBC (Push Button Configuration)
1
From the PREFERENCES menu, highlight
Network Setup and press
2
Press B or b to highlight Wireless Setup, and press
.
O K
3
Press B or b to highlight Easy Setup, and press
4
Press C or c to select PBC.
5
Press b to highlight Start Scan, and press
6
Following the on-screen instruction, push the
appropriate button on your AP.
7
When a window reporting that the setup succeeded
appears, press .
O K
Chapter 8: Advanced features
.
OK
™
) is standard designed
.
OK
.
OK
.
OK
To cancel searching for the AP:
Press while searching for the AP. A message will
RETURN
appear. Then press C or c to select Yes and press
Easy Setup using PIN (Personal Identification
Number)
1
From the PREFERENCES menu, highlight
Network Setup and press
2
Press B or b to highlight Wireless Setup, and press
.
OK
3
Press B or b to highlight Easy Setup, and press
4
Press C or c to select PIN.
5
Press b to highlight Start Scan, and press
6
Press B or b to select the desired AP and press
Note: Check the MAC address on label of the AP or
the manual of it and select an AP.
7
When the PIN code window appears, enter the
displayed PIN into your AP, and then press
start the PIN Setup. When a message displays to
report that the setup was successful, press
To cancel searching for the AP:
Press while searching for the AP. A message will
OK
RETURN
appear. Then press C or c to select Yes and press
Assisted Setup
1
From the PREFERENCES menu, highlight
Network Setup and press
2
Press B or b to highlight Wireless Setup, and press
.
OK
3
Press B or b to highlight Assisted Setup, and press
.
OK
4
Press B or b to select the desired AP and press
Note: Check the MAC address on the label or the
manual of the AP and select an AP.
5
Highlight Security Key and press
Keyboard window will appear.
6
Input the Security Key by using the Software
Keyboard (- page 68). To save your setting, press
the BLUE button.
Note:
• The Security Key must adhere to these conditions:
-TKIP/AES: 8-63 ASCII or 64 Hex characters
-WEP: 5 or 13 ASCII or 10 or 26 Hex characters
• Key ID of WEP encryption to set is only one.
7
Highlight Done, and then press
Note: If Network Name is not displayed, see step 4
and 5 in Manual Setup (- the next column) to set
Network Name before pressing Done.
Note: Settings are not saved if
is selected.
.
OK
.
OK
.
OK
.
OK
.
OK
to
OK
.
OK
.
OK
.
OK
.
OK
. The Software
OK
.
OK
is pressed before Done
RETURN
65