Using The Pc Settings Feature; Setting The Pc Audio - Toshiba Regza 42ZV650U Owner's Manual

Using the PC settings feature

You can view an image from a PC on the TV screen.
When a PC is connected to the TV's PC IN terminal,
you can use the PC Settings feature to make
adjustments to the image.
If the edges of the picture are cut off, readjust the
Horizontal Position and Vertical Position. If the
picture is affected by interference, readjust the Clock
Phase and Sampling Clock.
1
Select PC input mode (- "Selecting the video
input source to view" on page 41).
2
From the SETUP menu, highlight PC Settings
and press T.
Note: If a PC is not connected or there is no PC input
signal, this feature will be grayed out.
3
Press B or b to highlight the item you want to
adjust.
4
Press C or c to make an appropriate adjustments.
Note: The screen is disrupted momentarily when
adjusting the PC settings. This is not a sign of
malfunction.
Mode Description
Moves the picture left/right.
Horizontal
The adjustment range is within ±10
Position
from center.*
Moves the picture up/down.
Vertical
The adjustment range is within ±10
Position
from center.*
Helps to reduce noise and sharpen the
picture.
Clock Phase
The adjustment range is within ±32
from center.
Helps to reduce noise and minimize
Sampling periodic vertical stripes on the screen.
Clock The adjustment range is within ±5 from
center.
*The default settings and /or adjustment range vary
depending on the input signal format.
Chapter 6: Using the TV's features

Setting the PC Audio

This function allows you to output or mute the
sound from your PC when connecting using the PC
IN terminal and an analog RGB cable.
1
From the SETUP menu, highlight AV
Connection and press T.
2
Press B or b to select PC/HDMI 1 Audio.
3
Press C or c to select PC.
Note: Setting PC/HDMI 1 to PC will force HDMI 1
Audio to Digital mode.
57