Adjusting The Audio; Muting The Sound; Using The Digital Audio Selector; Selecting Stereo/Sap Broadcasts - Toshiba Regza 42ZV650U Owner's Manual

Adjusting the audio

Muting the sound

Press W on the remote control to partially reduce
(1/2 MUTE) or turn off (MUTE) the sound. Each
time you press W, the mute mode will change in the
following order:
1/2 Mute Mute
If the closed caption mode is set to Off when you
select "MUTE" mode, the closed caption feature is
automatically activated if the TV program is Closed
Captioned. To mute the audio without automatically
activating the closed caption feature, use Z to set the
volume to 0. See "Using the closed caption mode"
(- page 50) for more information on closed caption
modes.
Note: If you modify items in the SOUND menu while mute
is active, the mute will automatically be cancelled to allow
for proper adjustment.

Using the digital audio selector

You can use the Digital Audio setting to
conveniently switch between audio tracks on a
digital channel (for those channels that have
multiple audio tracks). This temporarily overrides
the audio track chosen by the language option under
MTS (- "Selecting stereo/SAP broadcasts" on right
hand column).
To use the digital audio selector:
1
From the PREFERENCES menu, highlight CC
and Digital Audio Selectors and press T.
2
Press B or b to select Digital Audio.
3
Press C or c to select the desired service, then
press O.
52
Chapter 6: Using the TV's features
Volume

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows
you to output high-fidelity stereo sound. MTS also
can transmit a second audio program (SAP)
containing a second language, music, or other audio
information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, the
word "STEREO" or "SAP" appears on-screen when
E is pressed. The MTS feature is only available for
analog signals on the ANT/CABLE input.
To listen a stereo sound:
1
From the SOUND menu, highlight MTS.
Press C or c to select Stereo and press O.
2
Note:
• You can typically leave the TV in Stereo mode because
it will automatically output the type of sound being
broadcast (stereo or monaural).
• If the stereo sound is noisy, select Mono to reduce the
noise.
To listen a second audio program on an analog
station (if available):
Select SAP in step 2.
Note:
• A Second Audio Program (SAP) can be heard only on
those TV stations that offer it. For example, a station might
broadcast another language as a second audio
program. If you have SAP on, you will see the current
program on the screen but hear the other language
instead of the program's normal audio.
• If you have SAP on and the station you are watching is not
broadcasting a second audio program, the station's
normal audio will be output. However, occasionally there
is no sound at all in SAP mode. If this happens, set the
MTS feature to Stereo mode.

Adjusting the audio quality

You can adjust the audio quality by adjusting the
bass, treble, and balance.
1
From the SOUND menu, highlight the item you
want to adjust (Bass, Treble, or Balance).
2
Press C or c to adjust the level of desire item, and
then press O.
• C makes the bass or treble weaker or increases the
balance in the left channel (depending on the item
selected).
• c makes the bass or treble stronger or increases the
balance in the right channel (depending on the item
selected).