Toshiba 37Z3030D Adjustment
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. LCD TV
  5. 37Z3030D
  6. Adjustment

Toshiba 37Z3030D Adjustment

Hide thumbs
Table of Contents

Advertisement

Quick Links

ADJUSTMENT [LCD Color Television] ASIA_EU
ADJUSTMENT
Service Mode
Entering to Service Mode
↓ ↓ ↓ ↓
↓ ↓ ↓ ↓
Service Mode display
file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.588\37Z...
1. Set VOLUME to minimum and press
button once on remote control.
2. Press
button again and hold button down.
3. While holding the
button on TV set.
Стр. 1 из 21
button, press MENU
12.05.2015

Advertisement

Table of Contents
loading

Related Manuals for Toshiba 37Z3030D

Summary of Contents for Toshiba 37Z3030D

  • Page 1 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 1 из 21 ADJUSTMENT Service Mode Entering to Service Mode 1. Set VOLUME to minimum and press button once on remote control. ↓ ↓ ↓ ↓ 2. Press button again and hold button down. ↓...
  • Page 2 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 2 из 21 Displaying the Adjustment Menu Press MENU button on TV. Service Mode Press ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ Press Adjustment Mode Key Function in the Service Mode The following key entry during display of adjustment menu provides special functions. CAUTION: Never try to perform initialization unless you have changed the memory IC.
  • Page 3 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 3 из 21 Test signal selection Selection of the adjustment items (on TV or remote control) Change of the data value Volume +/- (on TV or remote control) Adjustment menu mode ON/OFF MENU button (on TV) Initialization of the memory (QA02) CALL + CH button on TV...
  • Page 4 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 4 из 21 Item Name of adjustment RCUT R CUT OFF GCUT G CUT OFF BCUT B CUT OFF RDRV R DRIVE GDRV G DRIVE BDRV B DRIVE BRTC BRIGHTNESS CENTER COLC COLOR CENTER UVTT BASE BAND TINT CNTX...
  • Page 5 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 5 из 21 FPLG2 Channel LOGO Vector Clip SW (SD) FPLG3 Channel LOGO Vector Clip SW (HD) Factory preset data will be loaded after setting Model ID data. (Refer to Initialization of Memory Data of QA02 and setting data of signal board.) Adjusting the Data Pressing of VOLUME +/- button will change the value of data in the range from 00H to...
  • Page 6 After selecting OPT4 or OPT5, press + or - to set OPT4 or OPT5 value as table below. Panel option data Series Model name Panel vendor OPT4 value OPT5 value Z3000 EU/UK Digital 37Z3030D 0xC1 0x06 42Z3030D 0xC1 0x07 47Z3030D 0xC6 0x08 0xC1 0x0B 52Z3030D...
  • Page 7 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 7 из 21 Panel Full HD Resolution WXGA Panel 100Hz Ex. OPT5 value 0x06 indicates that panel size is 37. OPT5 (bit7) (bit6) (bit5) (bit4) (bit3) (bit2) (bit1) (bit0) Size Convert from Bit (Binary) to Hex The table for converting from bit (D7-D0) to hex (0x**).

  • Page 8: Exit From Service Mode

    ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 8 из 21 E.g. If Bit D7-0 = 0101 1010, Hex data is 0x5A. Exit from Service Mode Pressing POWER button to turn off the TV once. Initialization of Memory Data of QA02 and Setting Data of Signal Unit After replacing QA02 or signal board, the following initialization is required.
  • Page 9 8) Set I2C check function of TVOP to enable. 9) Check the picture carefully. If necessary, adjust any adjustment item above. Perform "Auto tune" on the owner's manual. MODEL ID (HEX) Model name Panel vendor 0x01 37Z3030D 0x02 42Z3030D 0x03 47Z3030D...
  • Page 10 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 10 из 21 0x17 0x18 0x19 0x20 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x30 0x31 0x32 0x33 Initializing Data setting flowchart after replacing the Signal Unit file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.588\37Z... 12.05.2015...
  • Page 11 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 11 из 21 Test Signal Selection file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.588\37Z... 12.05.2015...

  • Page 12: Self-Diagnostic Function

    ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 12 из 21 Every pressing of button on the remote control changes the built-in test patterns on screen as described below in Service Mode. Picture Signal Red raster Green raster Blue raster All Black All White Self Diagnostic Function 1.
  • Page 13 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 13 из 21 (1) Firmware : Version information of microprocessor Series name (AAAA) and market area (BB) and software program version (0000) (2) Time : Total hour of turn the TV on. (Unit : H) (3) BL_STATUS : Counter for saving BackLight on error.
  • Page 14 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 14 из 21 (SCART (FULL)) (Component/Composite/S) HDMI1 HDMI2 HDMI3 DTV (Digital Only) Version Check Mode 1. Press "9" button twice on remote control during display of adjustment menu in the service mode. The version of main MPU will be checked. 2.
  • Page 15 EDID data check item. Display channel numbers depend on HDMI input numbers. OK : EDID data is enable. NG : EDID data is disable. (6) SW Ver Version information of DB software as Toshiba release. (Only digital model.) (7) MW Ver file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.588\37Z... 12.05.2015...
  • Page 16 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 16 из 21 Left side is Application and UI version information of DB software. (Only digital model.) Right side is Firmware (Driver) version information of DB software. (Only digital model.) (8) A/D Adjust A/D adjustment item. --MAIN : It's enable only in double Window model.
  • Page 17 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 17 из 21 1. Press "9" button thrice on remote control during display of adjustment menu in the service mode. The status of this model will be checked. 2. During Status Check, the following displays are shown. * Status check display and Item are subject to the models.
  • Page 18 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 18 из 21 (7) SCREEN SIZE : Display the screen size as follows. Exact Scan Wide Super Live 2 Cinema 2 Super Live 1 Cinema 1 Subtitle 14:9 Note: Exact Scan is shown only for 1080p panel model with video input mode except pc. (8) OTHER STATUS : Other status information : Display three numbers of 2 byte data.
  • Page 19 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 19 из 21 (Video/TV) D3 (bit3) User remote control operation Disable Enable (Service mode and Supere User mode may possible to setting only) D2 (bit2) Disable SET UP MENU except Disable Enable language. (Display the language only) (tuning SETUP MENU) D1 (bit1) Disable SETUP MENU...

  • Page 20: Led Indication

    ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 20 из 21 OPT7 FUNCTION DESCRIPTION 0 (Normal) D7 (bit7) Enable mode that speaker volume will be set Enable Disable in forced when turn ON the main power D6 (bit6) ~ Forced speaker volume 0 ~ 100 [decimal] (Normal: 0) D0 (bit0) Value above 100 is no effect.
  • Page 21 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 21 из 21 and turn ON the TV. 2 Green is OFF; Abnormal operation of Turn OFF the TV and unplug Red blinks continuously at 1- BUS line. the power cord. second intervals. Plug the power cord in again and turn ON the TV.

  • Page 22: Function And Operation

    Стр. 1 из 1 FUNCTION AND OPERATION The Remote Control Simple at-a-glance reference of your remote control. file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.120\37Z... 12.05.2015...

  • Page 23: Controls And Input Connections

    Стр. 1 из 2 FUNCTION AND OPERATION Controls and Input Connections A wide variety of external equipment can be connected to the input sockets on the side of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.
  • Page 24 Стр. 2 из 2 Using the Controls and Connections file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.715\37Z... 12.05.2015...
  • Page 25 Стр. 1 из 2 FUNCTION AND OPERATION Tuning Digital Television for the First Time Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected. To set up the television use the buttons on the remote control.
  • Page 26 Стр. 2 из 2 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.076\37Z... 12.05.2015...

  • Page 27: Digital Auto Tuning

    Стр. 1 из 3 FUNCTION AND OPERATION Digital Auto Tuning Note: As new services are broadcast it will be necessary to re-tune the television in order to view them. Auto Tuning file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.498\37Z... 12.05.2015...
  • Page 28 Стр. 2 из 3 Analogue Switch-Off file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.498\37Z... 12.05.2015...
  • Page 29 Стр. 3 из 3 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.498\37Z... 12.05.2015...

  • Page 30: Digital Programme Sorting, Manual Tuning

    Стр. 1 из 3 FUNCTION AND OPERATION Digital Programme Sorting, Manual Tuning Note: When the television is switched off the mode being viewed at the time will automatically be selected when the television is switched back on. Programme Sorting file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.769\37Z... 12.05.2015...
  • Page 31 Стр. 2 из 3 Manual Tuning file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.769\37Z... 12.05.2015...
  • Page 32 Стр. 3 из 3 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.769\37Z... 12.05.2015...
  • Page 33 Стр. 1 из 2 FUNCTION AND OPERATION Tuning Analogue Mode for the First Time The Quick Setup feature will tune all analogue channels currently available in the area. To put the television into ATV mode press the A/D button. file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.389\37Z... 12.05.2015...
  • Page 34 Стр. 2 из 2 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.389\37Z... 12.05.2015...
  • Page 35 Стр. 1 из 4 FUNCTION AND OPERATION Analogue Manual Tune The television can be tuned-in manually using Manual tuning. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.
  • Page 36 Стр. 2 из 4 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.509\37Z... 12.05.2015...
  • Page 37 Стр. 3 из 4 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.509\37Z... 12.05.2015...
  • Page 38 Стр. 4 из 4 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.509\37Z... 12.05.2015...
  • Page 39 Стр. 1 из 2 FUNCTION AND OPERATION Auto Tune Using Auto Tuning file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.142\37Z... 12.05.2015...
  • Page 40 Стр. 2 из 2 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.142\37Z... 12.05.2015...

  • Page 41: Safety Instruction

    Handling the LCD Module Стр. 1 из 4 SAFETY INSTRUCTION Handling the LCD Module Safety Precaution In the event that the screen is damaged or the liquid crystal (fluid) leaks, do not breathe in or drink this fluid. Also, never touch this fluid. Such actions could cause toxicity or skin irritation. If this fluid should enter the mouth, rinse the mouth thoroughly with water.
  • Page 42 Handling the LCD Module Стр. 2 из 4 3. If the panel surface becomes soiled, wipe with cotton or a soft cloth. If this does not remove the soiling, breathe on the surface and then wipe again. If the panel surface is extremely solied, use a CRT cleaner as a cleaner. Wipe off the panel surface by drop the cleaner on the cloth.
  • Page 43 Handling the LCD Module Стр. 3 из 4 6. CMOS-LSI circuitry is used in the LCD module, so avoid damage due to static electricity. When handling the module, use a wrist ground or anchor ground. 7. Do not expose the LCD module to direct sunlight or strong ultraviolet rays for an extended period of time.
  • Page 44 Handling the LCD Module Стр. 4 из 4 10. When transporting the LCD module, do not use packing containing epoxy resin (amine) or silicon resin (alcohol or oxim). The gas generated by these materials can cause loss of polarity. file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.848\37Z... 12.05.2015...

  • Page 45: Panel Identification

    Стр. 1 из 1 PANEL IDENTIFICATION Panel Identification If the several panels are alternatively used in the same model without amending the model name, the identification marking will be shown at the last digit of the set serial number on the specification label on the back cover.
  • Page 46 U02A LOW-B U01A POWER U03C U04A SIGNAL U03A U06A AV-Terminal Front-HDMI U05A DIGITAL PCMCIA Card Slot U03B...

  • Page 47: Safety Precaution

    Стр. 1 из 4 SAFETY INSTRUCTION WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" INSTRUCTIONS BELOW. Safety Precaution WARNING: SERVICING SHOULD NOT BE ATTEMPTED BY ANYONE UNFAMILIAR WITH THE NECESSARY PRECAUTIONS ON THIS RECEIVER. THE FOLLOWING ARE THE NECESSARY PRECAUTIONS TO BE OBSERVED BEFORE SERVICING THIS CHASSIS.
  • Page 48 Стр. 2 из 4 inflammability, voltage resistance, etc. therefore, use only replacement parts that have these same characteristics. Use only the specified parts when the mark is indicated in the circuit diagram or parts list. 7. Parts mounting and routing dressing of wirings should be the same as that used originally.
  • Page 49 Стр. 3 из 4 Resistance values in orms ( ). V: Voltmeter or oscilloscope (r.m.s. or peak reading) Input resistance : Input capacitance : 200 pF Frequency range : 15 Hz to 1 MHz and d.c. respectively Note: Appropriate measures should be taken to obtain the correct value in case of non sinusoidal waveforms.

  • Page 50: Product Safety Notice

    Стр. 4 из 4 Product Safety Notice Many electrical and mechanical parts in this chassis have special safety-related characteristics. These characteristics are often passed unnoticed by a visual inspection and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc.

  • Page 51: Specification

    Стр. 1 из 2 SPECIFICATION file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.413\37Z... 12.05.2015...
  • Page 52 Стр. 2 из 2 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.413\37Z... 12.05.2015...
  • Page 67 P2１2B Digital BOARD Audio OUT CVBS CVBS OUT IC302 ITU-R656 Audio Amp P200B PJ400 Digital VIDEO OUT DVB-CI x 1 PJ212 IC801 UART H801 IC301 Serial port COFDM Tuner Audio DAC for debug Demod IF Amp PJ142 SPDIF IC100 Uart0 IC401 CIMax-SP2L Donau TC90403FG...

  • Page 68: Schematic Diagram

    Стр. 1 из 2 SCHEMATIC DIAGRAM Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" OF THIS MANUAL. CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit or specified in the parts list.
  • Page 69 Стр. 2 из 2 = Electrolytic capacitor = Mylar capacitor 3. The parts indicated with " " have special characteristics, and should be replaced with identical parts only. 4. Voltages read with DIGITAL MULTI-METER from point indicated to chassis ground, using a color bar signal with all controls at normal, line voltage at nominal AC volts.
  • Page 187 Стр. 1 из 2 CABINET Stand Exploded View A425 A426 A427 A428 A429 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.040\37Z... 13.05.2015...
  • Page 188 Стр. 2 из 2 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.040\37Z... 13.05.2015...
  • Page 189 Стр. 1 из 1 PARTS LIST All Block Block : Search 1 / 3488 Jump Page : Location : Search Parts No. : Block Location Parts No. Description U01A POWER (PE0402) U01A 75008363 PC BOARD ASSY, PE0402A, POWER U01A POWER (PE0402) C801 76503510 CAPACITOR, PLASTIC FILM, LE224-C U01A POWER (PE0402)
  • Page 190 Стр. 1 из 1 PARTS LIST U01A POWER (PE0402) Block : Search 1 / 141 Jump Page : Location : Search Parts No. : Block Location Parts No. Description U01A POWER (PE0402) U01A 75008363 PC BOARD ASSY, PE0402A, POWER U01A POWER (PE0402) C801 76503510 CAPACITOR, PLASTIC FILM, LE224-C U01A POWER (PE0402)
  • Page 191 Стр. 1 из 1 PARTS LIST U02A LOW_B (PE0403) Block : Search 1 / 189 Jump Page : Location : Search Parts No. : Block Location Parts No. Description U02A LOW_B (PE0403) U02A 75008475 PC BOARD ASSY, PE0403A, LOW_B U02A LOW_B (PE0403) CE100 76092538 CAPACITOR, CERAMIC CHIP, 10V F 1UF Z U02A LOW_B (PE0403)
  • Page 192 Стр. 1 из 1 PARTS LIST U03A AV_TERMINAL (PE0398) Block : Search 1 / 836 Jump Page : Location : Search Parts No. : Block Location Parts No. Description U03A AV_TERMINAL (PE0398) U03A 75008791 PC BOARD ASSY, PE0398A1, AV_TERMINAL U03A AV_TERMINAL (PE0398) C101 76109103 CAPACITOR, CERAMIC CHIP, 50V B 0.01UF K U03A AV_TERMINAL (PE0398)
  • Page 193 Стр. 1 из 1 PARTS LIST U03B LED (PE0398) Block : Search 1 / 25 Jump Page : Location : Search Parts No. : Block Location Parts No. Description U03B LED (PE0398) U03B 75008792 PC BOARD ASSY, PE0398A2, LED U03B LED (PE0398) CB02 75005969 CAPACITOR ELECTROLYTIC 10V 221M, ESRE100ETC2 U03B LED (PE0398)
  • Page 194 Стр. 1 из 1 PARTS LIST U03C KEY (PE0398) Block : Search 1 / 19 Jump Page : Location : Search Parts No. : Block Location Parts No. Description U03C KEY (PE0398) U03C 75008793 PC BOARD ASSY, PE0398A3, KEY U03C KEY (PE0398) GB01 23362042 DIODE, ZENER, UDZS6.8B U03C KEY (PE0398)
  • Page 195 Стр. 1 из 1 PARTS LIST U04AS SIGNAL (PE0399) Block : Search 1 / 1562 Jump Page : Location : Search Parts No. : Block Location Parts No. Description U04AS SIGNAL (PE0399) U04AS 75008494 PC BOARD ASSY, PE0399A, SIGNAL U04AS SIGNAL (PE0399) C2000 V03GD0000786 CHIP CERAMIC CAPACITOR (1005) U04AS SIGNAL (PE0399)
  • Page 196 Стр. 1 из 1 PARTS LIST U05A DIGITAL (PE0284) Block : Search 1 / 595 Jump Page : Location : Search Parts No. : Block Location Parts No. Description U05A DIGITAL (PE0284) U05A 75009070 PC BOARD ASSY, PE0284B1, DIGITAL U05A DIGITAL (PE0284) C1401 V03GD0001170 CHIP CERAMIC CAPACITOR (2012) U05A DIGITAL (PE0284)
  • Page 197 Стр. 1 из 1 PARTS LIST U06A FRONT_HDMI (PE0400) Block : Search 1 / 80 Jump Page : Location : Search Parts No. : Block Location Parts No. Description U06A FRONT_HDMI (PE0400) U06A 75008328 PC BOARD ASSY, PE0400A, FRONT_HDMI U06A FRONT_HDMI (PE0400) C601 76109103 CAPACITOR, CERAMIC CHIP, 50V B 0.01UF K U06A FRONT_HDMI (PE0400)
  • Page 198 Стр. 1 из 1 PARTS LIST Miscellaneous Block : Search 1 / 18 Jump Page : Location : Search Parts No. : Block Location Parts No. Description Miscellaneous B001 75008370 LCD PANEL, LC370WU2-SLA1 Miscellaneous H001 75008369 TUNER, ENGF7708GF Miscellaneous H001A 23368919 CABLE, PHONO 2.5C 250MM, C4-0807ALI Miscellaneous H801...
  • Page 199 Стр. 1 из 1 PARTS LIST Accessory Block : Search 1 / 8 Jump Page : Location : Search Parts No. : Block Location Parts No. Description Accessory Y101 75008382 OWNERS MANUAL, ENGLISH Accessory Y101E 75008384 OWNERS MANUAL, EURO Accessory Y101N 75008385 OWNERS MANUAL, NORDIC Accessory...
  • Page 200 Стр. 1 из 1 PARTS LIST Cabinet Block : Search 1 / 12 Jump Page : Location : Search Parts No. : Block Location Parts No. Description Cabinet A201 75008372 FRONT BEZEL ASSY Cabinet A380 23717240 SCREW, BITTB3X10SZN Cabinet A401 75008373 BACK COVER ASSY Cabinet A411...
  • Page 201 Стр. 1 из 1 PARTS LIST Packing Block : Search 1 / 3 Jump Page : Location : Search Parts No. : Block Location Parts No. Description Packing A701A 75008378 CARTON BOX Packing A702A 75008379 PAD, TOP PACKING Packing A702B 75008380 PAD, BOTTOM PACKING file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.633\37Z...
  • Page 202 Стр. 1 из 2 PARTS LIST Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" OF THIS MANUAL. CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit or specified in the parts list.
  • Page 203 Стр. 2 из 2 : Metal Film : Fusible Resistor All CD and PF capacitors are ±5 %, 50 V and all resistor, ±5 %, 1/6 W unless otherwise noted. file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.665\37Z... 13.05.2015...

This manual is also suitable for:

32xv550pr42z3030d

Table of Contents