Chapter 6: Using The Tv's Features; Selecting The Video Input Source To View - Toshiba Regza 42ZV650U Owner's Manual

Chapter 6: Using the TV's features

Selecting the video input source
to view
To select the video input source to view:
Press + on the remote control or TV control
1
panel.
2
And then either:
a) Press 0–9; or
b) Repeatedly press B or b on the remote
control and then press T to change the input;
or
c) Repeatedly press + on the remote control or
TV control panel to change the input.
Inputs
0 ANT/CABLE ANT/CABLE
1 Video 1
2 Video 2
ColorStream HD1
4 ColorStream HD2
5 HDMI 1
REGZA-LINK
HDMI 2
6
HDMI 3
7
HDMI 4
8
9 PC
Note:
• You can label the video input sources according to the
specific devices you have connected to the TV
(- "Labeling input sources" on page 38).
• Sources can also be skipped (- "Setting video input
skip" on page 38).
• Inputs that are set to skip will be grayed out and will be
skipped over only when selecting inputs by repeatedly
pressing +.
• If one or more REGZA-LINK devices are connected to an
HDMI input, the REGZA-LINK icon will appear in the input
selector.
• When the Auto Input feature is set, you can also select a
video input source by pressing and holding the
corresponding MODE SELECT button for 2 seconds
(- page 39).
To select a REGZA-LINK device:
1
Press B or b to highlight an appropriate HDMI
input.
2
Press c to display the list of REGZA-LINK
devices for that input.
3
If there are multiple REGZA-LINK devices on
the input, use B or b to highlight a particular
device.
Press T to select the device and change input.
4
41