Selecting the video input source
To select the video input source to view:
on the remote control or TV control
And then either:
a) Press 0–5; or
b) Repeatedly press pq on the remote control
and then press
c) Repeatedly press
or TV control panel to change the input.
The current signal source displays in the top right
corner of the Input Selection screen.
• You can label the video input sources
according to the specific devices you have
connected to the TV ( "Labeling the video
input sources" at right).
• Sources can be "hidden" ( "Labeling the
video input sources" at right).
• "No Video Signal" will appear randomly on the
screen if no signal is received in video input
• If CEC device is connected to a HDMI input,
the REGZA-LINK icon will appear.
If a REGZA-LINK device with HDMI
switching capability (e.g. Audio Receiver) is
connected to the HDMI input:
on the remote or TV control panel
repeatedly to highlight HDMI 1 or HDMI 2.
If the connected CEC device has any connected
devices, a separate device selection popup window
Chapter 6: Using the TV's features
to change the input; or
on the remote control
repeatedly to highlight the desired input
source, and then press
• When selecting REGZA-LINK input sources
from the popup window using
REGZA-LINK devices may automatically turn
• When selecting input sources using pq,
you will have to press
particular device from the popup window.
Labeling the video input sources
You can label each video input source according to
the type of device you connected to each source,
from the following preset list of labels:
– – (default label)
HDMI Switch (HDMI inputs only)
Hide (to hide an unused input in the Input Selection
screen and in the Channel Browser™ Inputs list)
Note: If you select PC in the Input Selection
screen, you can choose only "– –", "Game
Console", or "Hide" as the label.
To label the video input sources:
and open the Preferences menu.
Highlight Input Labeling and press
to actually select a
2010/3/2 上午 11:28:47