Table of Contents
Advertisement
Enhancing the applications card at the customer
• The customer does not reset the applications card back to the factory settings
when expressly requested to do so.
• The malfunction can be traced to a certain application that was installed by the
customer.
• The support services are very time-consuming or the costs are excessively high
(e.g. when a cost-intensive test environment has to be established).
Notes on guarantee, warranty, and licensing
Please note the special provisions on guarantees, warranty, and licensing:
• Modifications made to the hardware or applications card lead to the immediate
loss of all warranty claims.
• Aastra accepts no warranty claims for malfunctions and limited functionality
caused by applications installed by the customer.
• Aastra accepts no warranty claims for malfunctions and limited functionality
caused by modifications to the embedded operating system.
• Please also note the
concerning the operation system. Aastra accepts no liability for infringements of
the licence terms caused by the customer.
Enhancing the applications card at the customer
You want to install the customer's own applications on the Windows operation sys-
tem of the applications card in addition to the pre-installed Aastra 400 applica-
tions. Please note the following:
• The applications you install must be certified for CPU2-S by the Aastra Applica-
tion Partner Programm A2P2.
• The installation and configuration of the pre-installed Aastra 400 applications
must not be changed. Any required services must not be deactivated or manip-
ulated in any way.
• The storage capacity for the pre-installed Aastra 400 applications must be en-
sured at all times.
Proceed as follows to install an applications card which you want to enhance with
the customer's own applications:
1. Install and configure the applications card according to these instructions.
28
Licence terms Windows Embedded Standard 7 (syd-011)
Applications card CPU2-S
syd-0500/1.2 – R3.0 SP1 – 04.2014
Advertisement
Table of Contents
