Table of Contents
Advertisement
Making enhancements with the customer's own
applications
In addition to the pre-installed Aastra 400 applications, you can also install
the customer's own applications on the applications card or use the server ex-
clusively for the customer's own applications.
Notes on the scope of performance and functions
All details relating to the scope of performance and functions on the applications
card are based on cards where no modifications have been made by the customer.
Enhancement with the customer's own applications and modifications to the oper-
ating system or installed Aastra 400 applications can result in different values.
Aastra only guarantees the scope of performance and functions for applications
cards where no modifications have been made by the customer.
Support notes
Please note the special provisions on support services:
• In order for the support team to be able to help in the event of faults, it requires
exact details of any changes made to the applications card and any applications
installed at the customer.
• Aastra does not guarantee support in connection with applications cards that
have been modified at the customer. Support is made on a best-effort basis.
• As part of support services, Aastra reserves the right to have the applications
card reset to the factory settings by the customer.
• Aastra does not offer support for third-party applications installed by the cus-
tomer.
Aastra reserves the right to refuse support in the following cases:
• The applications card is used as a server with the customer's own applications
only.
• There is not enough information available about the modifications made by the
customer or the applications installed by the customer.
• Communications applications have been installed which do not have an Aastra
A2P2 Certification or Qualification Diploma.
Applications card CPU2-S
syd-0500/1.2 – R3.0 SP1 – 04.2014
Reset applications card to factory settings
27
Advertisement
Table of Contents
