Table of Contents
Advertisement
Operation and Maintenance
Here you can find basic information on activating and deactivating the appli-
cations card and how to change the IP addressing afterwards. You can also
find information on upgrading the software on the applications card, replac-
ing the card and resetting the card to the factory settings.
Switch applications card on and off
The applications card has its own on/off push button, although it is connected
to the same power supply unit as the communication server.
Switching on and off the applications card is similar to starting a computer, and
may take a while. The On/Off push button LED turns green after the booting pro-
cess.
You can switch on or shut down the communication server and applications card
individually or simultaneously via the integrated user interface.
You can restart or shut down the applications card via WebAdmin
System reset
view).
Warning:
Do not switch off a communication server with a built in applications card
by interrupting the power supply.
To restart the applications card, use the reboot function in WebAdmin or the com-
munication server's integrated user interface.
Changing the IP-Addressing
You want to change the IP addressing on the communication server and appli-
cations card. For this to work, you must keep to the correct sequence.
Note:
The communication server and the applications card must be in the same
subnet.
Proceed as follows to change the IP addressing on the communication server and
applications card:
1. In WebAdmin, navigate to the
put
fields.
Applications card CPU2-S
syd-0500/1.2 – R3.0 SP1 – 04.2014
Switch applications card on and off
Multimedia
/
IP network
(Maintenance
view and click on
Reset in-
/
21
Advertisement
Table of Contents
