Table of Contents
Advertisement
Configuring the fax server
The server-based fax service integrated on the applications card converts in-
coming messages into PDF files and sends them to the recipient as an e-mail
attachment. When outgoing PDF files in e-mail attachments are converted
into fax messages. This section deals only with the configuration of the fax
server. To configure the entire fax service, you need additional configuration
steps.
Routing of incoming fax messages
DDI numbers for receiving external fax messages are monitored directly by the fax
server and are not linked with a call distribution element. The fax server converts
fax messages of the type Group3 fax into an e-mail with attachment and sends it to
the destination user. Use of the fax service is subject to fax licences.
Fax server settings
Parameter
Version
(display only)
IP address and port
(display
only)
Domain
Fax header
E-mail address for error mes-
sages
Applications card CPU2-S
syd-0500/1.2 – R3.0 SP1 – 04.2014
Explanation
Currently installed fax server version.
The fax service IP address is identical to the applications card IP address. The per-
manently assigned port is port 9060.
The standard domain name is fax.local. Please do not modify this if possible,
after installing the fax client application on the PCs. However, if necessary, you
must adapt the registry as follows on each PC:
1. Start the fax client setup, with the following parameter request, whereby you
must replace
fax.local
with the new domain name:
ent-Setup32.exe /v"REG_ADDREXTFAXPRE-
FIX=\"[SMTP:\" REG_ADDREXTFAXPOST-
FIX=\"@fax.local]\""
2. Check the registry input. This should be as follows, with the new domain
name in place of fax.local:
WARE\Wow6432Node\Ferrari\fomclient\Out-
look\Addin] "AddrExtFaxPostfix"="@fax.local"
Enter the header here that should appear on the fax.
Enter here the e-mail address to which the fax server should send error mes-
sages.
Aastra-Fax-Cli-
HKEY_LOCAL_MACHINE\SOFT-
About Aastra
17
Advertisement
Table of Contents
