SunSetter EasyShade Replacement page 3

Follow these instructions if you wish to change your current Open or Close Limits.
NOTE: Do Not exceed the 84" Open Limit as this will cause the screen to roll up
backwards in the housing.
my
my
02/17/12
APPENDIX A
Adjusting the Open and Close Limits
of the EasyShade Motor
To Change the Open Limit:
Move the EasyShade to its current Open limit position and let it stop. Press the
(UP) and (DOWN)
release. Adjust to a new Open limit position. Press the (MY)
EasyShade jogs, then release. Check the new Open limit.
To Change the Close Limit:
Move the EasyShade to its current Close limit position and let it stop. Press the
(UP) and (DOWN)
release. Adjust to a new Close limit position. Press the (MY)
EasyShade jogs, then release. Check the new Close limit.
SunSetter Products, a Massachusetts Limited Partnership, 184 Charles Street, Malden, MA 02148
buttons simultaneously until the EasyShade jogs, then
buttons simultaneously until the EasyShade jogs, then
button until the
my
button until the
my
ES_M_APP-A