ESP GuardCam LED Manual page 10

Recording your own messages (see fig . 9)
Guardcam LED will allow you to record two messages of your own for delivery on
detection . To achieve a good quality playback it is best practice to make these recordings
prior to final installation speaking clearly in an environment free from background noise .
The microphone is located at the base of the unit directly above button A .
Two separate messages may be recorded for a maximum length of 10 seconds each .
To record a message press and hold button A . After the "bleep" release button A and
record your message . When finished press button A again to stop recording, you will here
a double confirmation bleep .
To record a second message simply repeat the process .
To check the recorded message/s press and release button B . Should you wish to delete a
self-recorded message press and hold button B for 3 seconds, a double
bleep will confirm deletion .
NB If you attempt to record a new message without first deleting an old message
you will hear a triple error bleep .
10