Jetpack; Before You Begin; Installing Jetpack Tx1 - Nvidia Jetson TX1 User Manual

JetPack

This section is intended to help you get familiar with installing the Developer Pack (JetPack TX1), using
the tools and running sample code.

Before you Begin

> You have a Tegra Developer Kit equipped with the NVIDIA Tegra TX1 processor.
> You have a host machine that is running Linux.
> Your developer system is cabled as follows:
 Serial cable plugged into the serial port J1A2 UART4 on the target connected to your Linux
host directly or through a serial-to-USB converter. (To setup serial console on the Linux host.)
USB Micro-B cable connecting (J1E1 USB0) to your Linux host for flashing.

 (Not included in the developer kit) To connect USB peripherals such as keyboard, mouse, and
[optional] USB/Ethernet adapter (for network connection), a USB hub should be connected to
the working USB port (J1C2 USB2) on the system.
An HDMI cable plugged into "J1C1 HDMI1" on the target which is connected to an external

HDMI display.
 An Ethernet cable plugged into the J1D1 on board Ethernet port.
> Download latest JetPack TX1
The latest version of the Development Pack (JetPack TX1) is available at

All available JetPack TX1 downloads here.


Installing JetPack TX1

The following instructions assume you have downloaded the latest JetPack version, JetPack-
${VERSION}.run, where ${VERSION} refers to the version string for the installer you have.
1. Add exec permissions for the JetPack-${VERSION}.run
chmod +x JetPack-${VERSION}.run
Jetson | Copyright © 2014 NVIDIA Corporation. All rights reserved.
Jetson TX1 Developer Kit
User Guide
NVIDIA Developer.
Page 8 of 27