Nvidia Jetson TX1 User Manual page 13

NOTE: JetPack will now proceed with setting up the Jetson Developer Kit target, if the
corresponding components were selected (i.e., flashing the OS and pushing components to
the Jetson Developer Kit target).
9. If you deselected Flash OS in the Component Manager, you will need to enter the IP
address, user name, and password to set up an ssh connection to the target device.
After you enter the required information and click Next, JetPack will begin installing
components on the target device.
Jetson | Copyright © 2014 NVIDIA Corporation. All rights reserved.
Jetson TX1 Developer Kit
User Guide
Page 13 of 27