11
Description — FLIR Screen-EST
Kiosk
11.1 System parts
1. Camera unit
2. Tablet
3. Stand
11.2 Camera web interface
The FLIR Screen-EST Kiosk camera has a web interface. If the camera has been reset
to factory default settings, you must log in to the camera web interface to re-configure
the firewall settings.
To log in to the camera web interface, you need to find the camera on the IP network by
using the FLIR IP Config software.
11.2.1 Install FLIR IP Config
FLIR IP Config is a software used to detect cameras in an IP network.
FLIR IP Config is pre-installed on the tablet. If FLIR IP Config has been removed, you
have to re-install the software.
To install the FLIR IP Config software, do the following:
1. Go to
https://flir.custhelp.com/.
2. In the search field, enter "FLIR IP Config" and then click the Search button. In the
search results, click the Download FLIR IP Config link.
3. Download the latest version of FLIR IP Config (zip file).
4. Unzip the file and run the *.exe file.
5. Follow the instructions in the installation wizard.
11.2.2 Open the camera web interface
To log in to the camera web interface, you need the administrator password. The pass-
word is available on the camera calibration certificate, which is included in the FLIR
Screen-EST Kiosk package.
44
#T810570; r. AA/72255/72255; en-US