Table of Contents
Advertisement
8
Operation — Operator instructions
2. To turn on/off the tablet, push the power button.
8.4 Problems — What shall I do?
This section describes some actions you may need to perform and what you shall do in
case of problems.
8.4.1 Connect the camera
To connect the camera to the FLIR Screen-EST application, do the following:
1. In the FLIR Screen-EST operator window, find the FLIR camera in the Discovery list
and tap the connect button. This connects the camera and displays live video.
2. Make sure the Auto-reconnect check box is selected. This will make the camera con-
nect automatically the next time you start FLIR Screen-EST.
8.4.2 Restart the system
To restart the system, do the following:
1. Reset the reference temperature, see section 8.4.3 Reset the reference temperature.
2. Collect new reference samples, see section 8.3.1.1 Collect reference samples.
8.4.3 Reset the reference temperature
To reset the reference temperature average, do the following:
1. Tap somewhere in the Value/Samples count/Status area. This displays the reset
button.
#T810570; r. AA/72255/72255; en-US
30
Advertisement
Table of Contents
