Make Sure The Camera Focus Is Correct; Place The Queueing System And Supporting Materials; Optional: Place The Operator Display; Test The Setup - FLIR Screen-EST Kiosk User Manual

6
Setup — Screening station

6.3.5 Make sure the camera focus is correct

1. Place a person at the marking on the tape that indicates the screening position.
Note It is important that the person stands at the marking for the screening position
(not closer or further away from the camera).
2. In the FLIR Screen-EST operator window, click the Auto adjust focus button. This ad-
justs the focus automatically.
Note For accurate screening, the camera focus must be correct. If the focus should be
changed by mistake, a new focus adjustment must be made.

6.3.6 Place the queueing system and supporting materials

Queueing system.
1. Place the barriers that will guide the persons through the screening station.
2. Place the arrow stickers.
Note You may want to start with temporary markings and wait with the arrow stick-
ers until you have tested the screening station for a few days.
Optional: Backdrop.
1. Place the backdrop behind the screening position.
2. Look at the live image in FLIR Screen-EST and make sure the camera only sees the
backdrop.
Optional: Information materials.
1. Place the information roll-up
2. Place the instruction roll-up

6.3.7 Optional: Place the operator display

1. Place the operator display.
2. Connect power to the display.
3. Connect the display to the tablet using a wireless display adapter.

6.3.8 Test the setup

Make sure the system detects faces of persons with different heights.
1. Start the FLIR Screen-EST.
2. Collect reference samples.
Before the screening can start, you must record samples for the calculation of the
reference temperature average. You do this by screening 10 healthy persons.
To collect reference samples, do the following:
2.1. Place a healthy person at the screening position.
#T810570; r. AA/72255/72255; en-US
16