Table of Contents
Advertisement
6
Setup — Screening station
6.3.1 Plan and prepare the screening station
Before you set up the screening station, you need to do some planning. Where will you
conduct the screening? How should the visitors flow into the screening station and out?
Who will be the operator? What should happen in case of a screening alarm?
• For factors to consider related to the area around the screening station, see section
7.3 Screening station considerations.
• For factors to consider related to the policies of your company, see section 7.4 Com-
pany policies.
6.3.2 Set up the FLIR Screen-EST Kiosk
1. Place the FLIR Screen-EST Kiosk.
2. Connect the power cable to a power outlet.
6.3.3 Define the screening position
1. Make a straight line from the foot of the FLIR Screen-EST Kiosk stand towards the
screening position - use a masking tape.
2. Make a mark on the tape at 120 cm (47 in.) from the foot of the stand, indicating the
screening position.
6.3.4 Connect the camera to FLIR Screen-EST
1. Turn on the tablet and start the FLIR Screen-EST application.
2. Find the FLIR camera in the Discovery list and tap the connect button. This connects
the camera and displays live video.
3. Make sure the Auto-reconnect check box is selected. This will make the camera con-
nect automatically the next time you start FLIR Screen-EST.
#T810570; r. AA/72255/72255; en-US
15
Advertisement
Table of Contents
