Table of Contents
Advertisement
6
Setup — Screening station
6.2 Equipment, materials, tools
For the screening station, you need the following equipment:
• FLIR Screen-EST Kiosk, installed as described in chapter 5 Installation — FLIR
Screen-EST Kiosk.
• Screening position floor sticker (included in the FLIR Screen-EST Kiosk package).
• Queueing system; e.g. barriers, arrow stickers.
Optional equipment:
• Operator display, including power cable and wireless display adapter.
• Backdrop, preventing background disturbances.
• Information materials; e.g. roll-ups.
Note For available roll-ups and other supporting materials from FLIR Systems, go to
https://www.flir.com/.
The following materials and tools can be useful:
• Measuring tape or yardstick.
• Screwdriver.
• Masking tape.
• Cable ties.
• Extension cords.
• Cable covers (to prevent people from stumbling over the cables).
Figure 6.1 FLIR Screen-EST
Kiosk
6.3 Step-by-step setup instructions
Before starting the setup, please read the instructions for the entire setup procedure.
Make sure you have all the equipment and tools needed, see section 6.2 Equipment, ma-
terials, tools.
The setup of the screening station includes the following main steps:
1. Plan and prepare the screening station.
2. Set up the FLIR Screen-EST Kiosk.
3. Define the screening position.
4. Connect the camera to FLIR Screen-EST.
5. Make sure the camera focus is correct.
6. Place the queueing system and supporting materials.
7. Optional: Place the operator display.
8. Test the setup.
9. Clearly mark the screening position.
10. Mark the positions of all equipment.
Note For step-by-step instructions, see the following sections.
#T810570; r. AA/72255/72255; en-US
Figure 6.2 Screening position
floor sticker
Figure 6.3 Backdrop
14
Advertisement
Table of Contents
