Table of Contents
Advertisement
6
Setup — Screening station
Note You may want to start with a temporary marking and wait with the supplied floor
sticker until you have tested the screening station for a few days.
1. Attach the supplied screening position floor sticker to the floor.
The distance from the foot of the FLIR Screen-EST Kiosk stand to the center of the
floor sticker shall be 120 cm (47 in.).
2. Remove the masking tape.
6.3.10 Mark the positions of all equipment
Mark the positions of any movable equipment (e.g. FLIR Screen-EST Kiosk, backdrop,
barrier poles) e.g. by tape on the floor. This to ensure that everything is put back in the
right place after e.g. cleaning of the floor.
Note You may want wait with the permanent markings until you have tested the screen-
ing station for a few days.
6.4 Optional: Customize FLIR Screen-EST
It is possible to run FLIR Screen-EST with the default settings. It is also possible to cus-
tomize FLIR Screen-EST according to your company policies (see section 7.4 Company
policies). You can select what the visitors see on the screen. There is also a sound alarm
option.
Note For other settings in FLIR Screen-EST, it is recommended to use the default
settings.
6.4.1 Open the Settings page
To open the Settings page, do the following:
1. In the FLIR Screen-EST operator window, tap the Live tab. This displays the toolbar.
2. Tap the Options button and then the Settings button. This opens the Settings page.
6.4.2 Visitor window
You customize the visitor window on the User screen tab.
Custom status messages
• Here you can change the status messages, e.g. translate the messages to your local
language.
Message font size
• Select the font size for the status messages.
Note Make sure the font size is as large as possible so people can read the text
from the screening position.
Visibility settings
• Select the Show secondary image check box to display both thermal and visual video.
• Use the Show hats/glasses/masks check boxes to select what symbols to display.
Note Display of the glasses symbol is recommended (select the Show glasses
check box). Removing eyeglasses is crucial for a correct screening result.
• Select the Enable animations check box to have a moving blue line in the visitor win-
dow, indicating that the system is in operation.
#T810570; r. AA/72255/72255; en-US
18
Advertisement
Table of Contents
